Orange Theme

[DeltaCon]

So, I am struggling making the Raymond Style brackets for my machine, and had some time to kill. So I put out on my working machine and give it some lipstick. As you can see the theme is orange, inspired by the first roll of ABS I made some of my own parts with. Planning on keeping that roll specifically for my own parts now! I managed to get around the machine to make these stripes 360 degrees while risking getting my shirt caught by the moving cheapskates... But striping the cheapskates itself on a working machine was even a bigger challenge... One that I did not dare to fulfil...

Luckily I have my own lettering equipment, therefore I was able to produce a sticky Logo quickly. The machinery is a leftover from my own lettering firm I once had.

[img]http://hennekens.info/rostock/RostockTheme_A.jpg[/img]
[img]http://hennekens.info/rostock/RostockTheme_B.jpg[/img]

[Eaglezsoar]

Good job! The printer looks great!

[e_hutch]

Looks good! What did you paint it with?

[DeltaCon]

Thanks. No I did not paint. I used lettering vinyl, like being used in car and window signing.