Blew up my new duetwifi
Blew up my new duetwifi
Just blew up the T0 input on the duetwifi. My machine has the HE280 hotend and I forgot the connections for T0 are keyed to provide ground to the accelerometer board. 12V backfed to the analog pin on the 3.3v atmel chip and the input in no longer. Just a warning to others.
-
- ULTIMATE 3D JEDI
- Posts: 1561
- Joined: Wed Sep 23, 2015 2:55 pm
Re: Blew up my new duetwifi
There's a SMD fuse on the Duet wifi, I think F1, near the processor. You may be able to desolder and replace it, as it's intended to protect the processor from that very set of issues.
Machines:
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router
Sic Transit Gloria Mundi
01-10011-11111100001
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router
Sic Transit Gloria Mundi
01-10011-11111100001
Re: Blew up my new duetwifi
Thank you, didn't think it was the fuse, but it was. When it first happened the bed temp was still working so I thought I blew the input not the fuse. Still a little puzzled about it.
-
- ULTIMATE 3D JEDI
- Posts: 1561
- Joined: Wed Sep 23, 2015 2:55 pm
Re: Blew up my new duetwifi
I don't know how it works either, but I suspect nothing short of wizardry from Dave and Tony.
Machines:
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router
Sic Transit Gloria Mundi
01-10011-11111100001
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router
Sic Transit Gloria Mundi
01-10011-11111100001