Hi guys,
Recently I got to work fixing my v2 and wasn't too careful when install the base top plate when i got engaged in an all out war with the t nut which just wouldn't let go
In hindsight I should've just taken the entire plate out before trying to unscrew the heated bed but well it's done.. what are my options here? Can I epoxy the t nut to the base plate? Or just get a new sheet?
T nut dug into the base top plate - what are my options?
-
- Plasticator
- Posts: 16
- Joined: Wed Sep 10, 2014 5:48 am
Re: T nut dug into the base top plate - what are my options?
You can use epoxy if you're very careful to keep it straight and keep it out of the threads.
g.
g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects