Whenever I flash over repetier my printer gets stuck in a weird boot loop. it'll start up then attempt to home the towers then estop and reboot.
Any help is appreciated
https://www.youtube.com/watch?v=GQZlVIxgPlc" onclick="window.open(this.href);return false;
Stuck in a boot loop
-
- ULTIMATE 3D JEDI
- Posts: 1409
- Joined: Sun May 11, 2014 6:18 pm
Re: Stuck in a boot loop
I had that happen to me when the reset button on the front panel got stuck. The plexiglass tab over the button was catching, and keeping the button pressed on the RamBo.
R-Max V2
Eris
Folger Tech FT-5 R2
Eris
Folger Tech FT-5 R2
Re: Stuck in a boot loop
also check your LCD cables, if the ribbon cables are put on wrong it can cause the printer to keep rebooting as you are describing.
Re: Stuck in a boot loop
I had to flip my lcd "B" cable, thanks for the help