Hey guys, printing with ABS and it changing speeds from 20-35mm/s causes surface quality changes...
What are the relevant settings to keep a constant speed?
Settings to achieve a consistant speed throughout print?
- craftymethod
- Printmaster!
- Posts: 128
- Joined: Wed Aug 13, 2014 4:45 am
-
- Printmaster!
- Posts: 616
- Joined: Wed Mar 18, 2015 1:11 am
Re: Settings to achieve a consistant speed throughout print?
MatterSlice, Slic3r, or Cura?
- craftymethod
- Printmaster!
- Posts: 128
- Joined: Wed Aug 13, 2014 4:45 am
Re: Settings to achieve a consistant speed throughout print?
Ahh Matterslice...
- craftymethod
- Printmaster!
- Posts: 128
- Joined: Wed Aug 13, 2014 4:45 am
Re: Settings to achieve a consistant speed throughout print?
Looks like my min layer print time was making my layers all different speeds. I reduced that to 0 and now operating at a constant speed.
Anyone know what min layer times abs can handle?
I think i'll need to turn the setting back on at some point...
Anyone know what min layer times abs can handle?
I think i'll need to turn the setting back on at some point...
Re: Settings to achieve a consistant speed throughout print?
30-45 seconds for me.
*not actually a robot