Poor connection or something else going on?

Post Reply
User avatar
KAS
ULTIMATE 3D JEDI
Posts: 1157
Joined: Thu Dec 04, 2014 6:06 pm

Poor connection or something else going on?

Post by KAS »

The pin connection is burnt a bit. Sign or of a loose connection or is that capacitor getting hot?
20160303_175319.jpg
User avatar
forrie
Printmaster!
Posts: 159
Joined: Wed Apr 16, 2014 7:15 am
Location: Crab Nebula

Re: Poor connection or something else going on?

Post by forrie »

Pop the black pin out and have a look inside (and the pin) , should give you the answer
I'm not an alcoholic...I'm Australian!
TheIrishScion
Printmaster!
Posts: 56
Joined: Mon Jan 18, 2016 5:44 pm

Re: Poor connection or something else going on?

Post by TheIrishScion »

KAS wrote:Sign or of a loose connection or is that capacitor getting hot?
Loose connector, capacitors don't get hot like that. Well, not for very long, and you can tell they did because of the exciting bang they make very soon after they start ;-)
Post Reply

Return to “Smoothieboard and variants”