ERIS is almost alive guys!
ERIS is almost alive guys!
So some of you may know, we're headed to CES this year (ok, so in about two weeks! ) and we have been working on something to show off there. Some of you may also have seen the little drops here and there of it, but here it is, The ERIS. I'll say that Steve and JJ are both hard at it finishing up the design and tooling up for production of the injection molded parts, and we're on the home stretch. Quick specs for you guys to ponder, $599 - 5" dia 6" tall build area - non-PEEK hotend - no LCD, entry level but upgradeable in the future - primarily PLA, but will be capable of others as well, may need to roll your own heated beds, but TGlase and PLA are no probs. - Glass build surface for flatness - Single fan for hotend/part cooling (sneaky ductwork in the molds ) Oh, and made by us, all right here in the corn fields! Here's a few pics/renders for now.
- Attachments
-
- InnovationAd.pdf
- (1.06 MiB) Downloaded 492 times
-
- Printmaster!
- Posts: 695
- Joined: Fri Nov 07, 2014 9:38 am
Re: ERIS is almost alive guys!
Very cool! Can I assume that the plan is for these to come pre-assembled and ready to print OOTB?
nitewatchman wrote:it was much cleaner and easier than killing a chicken on top of the printer.
Re: ERIS is almost alive guys!
Yes sir.
Re: ERIS is almost alive guys!
Very nice! I know someone who would love this.
Orion to Cartesian http://forum.seemecnc.com/viewtopic.php?f=59&t=7808" onclick="window.open(this.href);return false;
- bvandiepenbos
- Printmaster!
- Posts: 927
- Joined: Thu Apr 05, 2012 11:25 pm
- Location: Goshen, IN
- Contact:
Re: ERIS is almost alive guys!
Looking good!
ooohh my... 2 weeks to CES and you guys are just finishing drawings and starting to build molds, your just a bit insane.
But I know you guys will pull it off, you always do.
Nothing like a deadline to move Steve along, eh?
I just might stop in tomorrow if I can slip away from the shop.
ooohh my... 2 weeks to CES and you guys are just finishing drawings and starting to build molds, your just a bit insane.
But I know you guys will pull it off, you always do.
Nothing like a deadline to move Steve along, eh?
I just might stop in tomorrow if I can slip away from the shop.
~*Brian V.
RostockMAX v2 (Stock)
MAX METAL "ShortyMAX"
MAX METAL Rostock MAX Printer Frame
NEMESIS Air Delta v1 & v2 -Aluminum delta printers
Rostock MAX "KITT" - Tri-Force Frame
GRABER i3 "Slim"
RostockMAX v2 (Stock)
MAX METAL "ShortyMAX"
MAX METAL Rostock MAX Printer Frame
NEMESIS Air Delta v1 & v2 -Aluminum delta printers
Rostock MAX "KITT" - Tri-Force Frame
GRABER i3 "Slim"
- jdurand
- Printmaster!
- Posts: 397
- Joined: Mon Dec 01, 2014 12:41 am
- Location: Silicon Valley, California
- Contact:
Re: ERIS is almost alive guys!
I did a CES show where I was still writing code in a Las Vegas hotel room for a SEGA project I got drafted onto at the last minute.
Standing on the edge of reality... (me)
Quando omni flunkus moritati (Red Green)
Let no man belong to another that can belong to himself. (Paracelsus)
All things are poison and nothing is without poison; only the dose makes a thing not a poison. (Ibid.)
Quando omni flunkus moritati (Red Green)
Let no man belong to another that can belong to himself. (Paracelsus)
All things are poison and nothing is without poison; only the dose makes a thing not a poison. (Ibid.)
-
- ULTIMATE 3D JEDI
- Posts: 1409
- Joined: Sun May 11, 2014 6:18 pm
Re: ERIS is almost alive guys!
Tempting to have at work,,,, at least use it to print out business cards.
R-Max V2
Eris
Folger Tech FT-5 R2
Eris
Folger Tech FT-5 R2
-
- Printmaster!
- Posts: 125
- Joined: Wed Mar 05, 2014 9:53 pm
- Location: Cooley Springs,SC
Re: ERIS is almost alive guys!
Can't wait to see the cute little guy!
Distributor of SeeMeCNC in South Carolina
-
- Prints-a-lot
- Posts: 27
- Joined: Tue Oct 14, 2014 11:08 pm
- Location: Somewhere out there.
Re: ERIS is almost alive guys!
I like how you guys keep pushing things in different directions, very interesting...
Re: ERIS is almost alive guys!
Any news?
Questions? Ask in a thread - PMs are off.
AI Calibration | Dimensional Accuracy Calibration | Hand-Tune your PID | OctoPi + Touchscreen setup | My E3D hot end mount, Z probe, fan ducts, LED ring mount, filament spool holder, etc.
AI Calibration | Dimensional Accuracy Calibration | Hand-Tune your PID | OctoPi + Touchscreen setup | My E3D hot end mount, Z probe, fan ducts, LED ring mount, filament spool holder, etc.
- Jimustanguitar
- ULTIMATE 3D JEDI
- Posts: 2631
- Joined: Sun Mar 31, 2013 1:35 am
- Location: Notre Dame area
- Contact:
Re: ERIS is almost alive guys!
I took some pictures of it at an expo that we both attended a couple weeks back. It's a good looking machine, here's one of the two prototypes.
[img]http://i.imgur.com/042MwCP.png[/img]
[img]http://i.imgur.com/cDHamgg.png[/img]
[img]http://i.imgur.com/4Bry4Xc.png[/img]
[img]http://i.imgur.com/KJNasnM.png[/img]
[img]http://i.imgur.com/5lRqZwc.png[/img]
[img]http://i.imgur.com/hVKYJKX.png[/img]
It still has some printed parts on it, so I suspect that PartDaddy is still hard at work making molds.
[img]http://i.imgur.com/042MwCP.png[/img]
[img]http://i.imgur.com/cDHamgg.png[/img]
[img]http://i.imgur.com/4Bry4Xc.png[/img]
[img]http://i.imgur.com/KJNasnM.png[/img]
[img]http://i.imgur.com/5lRqZwc.png[/img]
[img]http://i.imgur.com/hVKYJKX.png[/img]
It still has some printed parts on it, so I suspect that PartDaddy is still hard at work making molds.
- Eaglezsoar
- ULTIMATE 3D JEDI
- Posts: 7185
- Joined: Sun Apr 01, 2012 5:26 pm
Re: ERIS is almost alive guys!
Looks nice!
Re: ERIS is almost alive guys!
What's the word on this?
Questions? Ask in a thread - PMs are off.
AI Calibration | Dimensional Accuracy Calibration | Hand-Tune your PID | OctoPi + Touchscreen setup | My E3D hot end mount, Z probe, fan ducts, LED ring mount, filament spool holder, etc.
AI Calibration | Dimensional Accuracy Calibration | Hand-Tune your PID | OctoPi + Touchscreen setup | My E3D hot end mount, Z probe, fan ducts, LED ring mount, filament spool holder, etc.
-
- Printmaster!
- Posts: 171
- Joined: Tue Apr 22, 2014 10:00 pm
Re: ERIS is almost alive guys!
Any delivery dates yet?
-
- Printmaster!
- Posts: 125
- Joined: Wed Mar 05, 2014 9:53 pm
- Location: Cooley Springs,SC
Re: ERIS is almost alive guys!
eager to have it ready for makerfaire columbia june 6!
Distributor of SeeMeCNC in South Carolina
Re: ERIS is almost alive guys!
I wonder what ever happened with this. Any news?
Orion to Cartesian http://forum.seemecnc.com/viewtopic.php?f=59&t=7808" onclick="window.open(this.href);return false;
Re: ERIS is almost alive guys!
It keeps stopping along side the road to smell the flowers.
g.
g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
-
- Printmaster!
- Posts: 695
- Joined: Fri Nov 07, 2014 9:38 am
Re: ERIS is almost alive guys!
Wild guess but I'd say it's because PartDaddy is too enamored with his giant delta that can almost print car parts, it's difficult for him to find time to put the finishing touches on the Eris...
nitewatchman wrote:it was much cleaner and easier than killing a chicken on top of the printer.
- Jimustanguitar
- ULTIMATE 3D JEDI
- Posts: 2631
- Joined: Sun Mar 31, 2013 1:35 am
- Location: Notre Dame area
- Contact:
Re: ERIS is almost alive guys!
I know that making the molds has been challenging, but I don't remember which piece was so much trouble. Steve mentioned at the MakerHive last week that they're rounding the last corner on it.
Re: ERIS is almost alive guys!
It's almost a year later. How's this project coming along?
Questions? Ask in a thread - PMs are off.
AI Calibration | Dimensional Accuracy Calibration | Hand-Tune your PID | OctoPi + Touchscreen setup | My E3D hot end mount, Z probe, fan ducts, LED ring mount, filament spool holder, etc.
AI Calibration | Dimensional Accuracy Calibration | Hand-Tune your PID | OctoPi + Touchscreen setup | My E3D hot end mount, Z probe, fan ducts, LED ring mount, filament spool holder, etc.
- Eaglezsoar
- ULTIMATE 3D JEDI
- Posts: 7185
- Joined: Sun Apr 01, 2012 5:26 pm
Re: ERIS is almost alive guys!
Thanks for the great pictures of the Eris. Maybe they will be completely ready at the Faire at the end of March.
- Jimustanguitar
- ULTIMATE 3D JEDI
- Posts: 2631
- Joined: Sun Mar 31, 2013 1:35 am
- Location: Notre Dame area
- Contact:
Re: ERIS is almost alive guys!
Sounds like there's an official launch date!
https://www.3dhubs.com/talk/thread/blac ... g-showcase" onclick="window.open(this.href);return false;
I know Steve's been busy getting the molds finalized. I'm sure it will be nice to see his hard work payoff. The whole team has invested a lot of their time into the project, I'm looking forward to seeing it launch!
https://www.3dhubs.com/talk/thread/blac ... g-showcase" onclick="window.open(this.href);return false;
I know Steve's been busy getting the molds finalized. I'm sure it will be nice to see his hard work payoff. The whole team has invested a lot of their time into the project, I'm looking forward to seeing it launch!
-
- ULTIMATE 3D JEDI
- Posts: 1409
- Joined: Sun May 11, 2014 6:18 pm
Re: ERIS is almost alive guys!
I'm surprised it's going to be unveiled near me. I'll have to stop by that weekend.
R-Max V2
Eris
Folger Tech FT-5 R2
Eris
Folger Tech FT-5 R2
-
- ULTIMATE 3D JEDI
- Posts: 1561
- Joined: Wed Sep 23, 2015 2:55 pm
Re: ERIS is almost alive guys!
Grumble. Now I want to get to Lansing to see it. Darn you guys for always having cool things I want to see. There goes an hour's drive.
Machines:
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router
Sic Transit Gloria Mundi
01-10011-11111100001
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router
Sic Transit Gloria Mundi
01-10011-11111100001