Show us your remote monitoring setup
Show us your remote monitoring setup
My new rostock max v2 has been printing for a total of over 2 days now. The novelty has slightly worn off for the household (except me) and it seems that it is no longer welcome to reside in the living room dining table where it was born. Probably the 40 ish hour print had something to do with it.
Living in a very urban area (City of 18 million, paying 1.5k USD for a 2 bedroom 1 living room small apartment, spending 2 hours a day in traffic) i think i will have to stuff the printer to the nano-room which is about 4 m2, and then later in a cupboard there because wife uses that room to store her shoes. As i am relatively inexperienced with printing, i would like to be able to remotely monitor the prints and preferably cut off power if I detect that "Basturgach" has bungled it up again.
What have you guys come up with?
I have a raspberry PI that i could dedicate, a spare iphone 4, and a laptop with ubuntu and a gopro hero2. Can also get a hero3 if need be.
Thanks a lot in advance for any ideas.
Living in a very urban area (City of 18 million, paying 1.5k USD for a 2 bedroom 1 living room small apartment, spending 2 hours a day in traffic) i think i will have to stuff the printer to the nano-room which is about 4 m2, and then later in a cupboard there because wife uses that room to store her shoes. As i am relatively inexperienced with printing, i would like to be able to remotely monitor the prints and preferably cut off power if I detect that "Basturgach" has bungled it up again.
What have you guys come up with?
I have a raspberry PI that i could dedicate, a spare iphone 4, and a laptop with ubuntu and a gopro hero2. Can also get a hero3 if need be.
Thanks a lot in advance for any ideas.
When on mobile I am brief and may be perceived as an arsl.
-
- ULTIMATE 3D JEDI
- Posts: 1409
- Joined: Sun May 11, 2014 6:18 pm
Re: Show us your remote monitoring setup
I doubt it's practical for you, but I just picked up a dropcam pro, So I can monitor it on my phone, and on my work pc. I have yet to come up with a kill switch for it.
R-Max V2
Eris
Folger Tech FT-5 R2
Eris
Folger Tech FT-5 R2
Re: Show us your remote monitoring setup
To kill it remotely, i had the idea of connecting by ssh or vnc or teamviewer to a computer connected tot he printer.
Another option is, i am controlling my living room lights with a relay connected to an arduino that is connected to my wifi router by a cable. If i change the modem config so that i can access it from the "outside" from a port. That relay can control the power to the board.
Can the gopro 3 be used just like your dropcam?
Another option is, i am controlling my living room lights with a relay connected to an arduino that is connected to my wifi router by a cable. If i change the modem config so that i can access it from the "outside" from a port. That relay can control the power to the board.
Can the gopro 3 be used just like your dropcam?
When on mobile I am brief and may be perceived as an arsl.
Re: Show us your remote monitoring setup
Octoprint
Octoprint
Octoprint
Octoprint
Octoprint
Re: Show us your remote monitoring setup
Downloading it now.
When on mobile I am brief and may be perceived as an arsl.
- jeffhuber
- Printmaster!
- Posts: 146
- Joined: Sun May 25, 2014 11:04 pm
- Location: San Francisco
- Contact:
Re: Show us your remote monitoring setup
You can also use repetier server.
I use an extra laptop and broadcast over Ustream - makes getting the feed anywhere really easy. Haven't gone for remote stopping a print yet. Generally just taxis home when things go bad.
I too live in a small, expensive apartment =)
I use an extra laptop and broadcast over Ustream - makes getting the feed anywhere really easy. Haven't gone for remote stopping a print yet. Generally just taxis home when things go bad.
I too live in a small, expensive apartment =)
Rostock max v2 with e3d v6
Re: Show us your remote monitoring setup
Skype. Free, available from anywhere. Turn on autoanswer.
Chris
Chris
Re: Show us your remote monitoring setup
Well I do not monitor my 3D printer as I never leave the house when it's on but I do monitor my CNC machine.
I have an incoming VPN connection setup on my computer and I just use remote desktop to control mach3 remotely.
For video I'm using a trendnet TV-IP851WIC. It's a cloud enabled camera so you can access from anywhere with a Cellphone.
I have an incoming VPN connection setup on my computer and I just use remote desktop to control mach3 remotely.
For video I'm using a trendnet TV-IP851WIC. It's a cloud enabled camera so you can access from anywhere with a Cellphone.
Orion Delta Printer
3 Axis CNC router + rotary axis
Craftex B2229 Lathe/Mill combo
3 Axis CNC router + rotary axis
Craftex B2229 Lathe/Mill combo
Re: Show us your remote monitoring setup
Repetier server would be a good. I will also give that a try.
I am not a great fan of remote desktop type of things. The data overhead is massive. You have to transfer lots of video and all the mouse moves, keyboard clicks etc etc etc... just to send one single home command which is a couple of bytes.
I am not a great fan of remote desktop type of things. The data overhead is massive. You have to transfer lots of video and all the mouse moves, keyboard clicks etc etc etc... just to send one single home command which is a couple of bytes.
When on mobile I am brief and may be perceived as an arsl.
- barry99705
- Printmaster!
- Posts: 707
- Joined: Sun Aug 11, 2013 6:10 pm
- Location: west ohio
Re: Show us your remote monitoring setup
teoman wrote:Repetier server would be a good. I will also give that a try.
I am not a great fan of remote desktop type of things. The data overhead is massive. You have to transfer lots of video and all the mouse moves, keyboard clicks etc etc etc... just to send one single home command which is a couple of bytes.
Not really. RDP running something like a browser on a site that has lots of animation usually only uses about 100kbps. With your cnc software full screen it should be a lot lower. I have a client that has a terminal server that has on average 5 outside users on it all the time. Doesn't really affect the internet at all. Teamviewer uses about 30Mb per hour from my experience. As long as you have a decent internet connection, I count decent as anything with faster than 1Mbps up, you should be good with a remote desktop type app.
Never do anything you don't want to have to explain to the paramedics.
Re: Show us your remote monitoring setup
I have also had generally good experience with RDP's. However occasionally they can get slower. Also why waste the extra?
Teoman
Teoman
When on mobile I am brief and may be perceived as an arsl.
- GeekStreetSolutions
- Printmaster!
- Posts: 47
- Joined: Wed May 21, 2014 5:11 pm
- Location: Sherman Oaks, California
- Contact:
Re: Show us your remote monitoring setup
I have a Belkin WeMo Switch (http://www.belkin.com/us/F7C027-Belkin/p/P-F7C027/) that I plug my printer into. That way if something happens to my octoprint connection I will still be able to kill power to the printer.