Checking in from San Martin, California

[deadsy]

The Rostock Max V2 Kit arrived a couple of weeks ago and it took me a couple of weekends of effort to put it all together.
This weekend the goal has been to calibrate and start printing - mission successful!

[img]http://i1243.photobucket.com/albums/gg545/sirmanlypowers/3d_printing/IMG_6491_zpsqhn9cblt.jpg[/img]

Per the user manual the first print was the fan housings- I still haven't installed them- just printing with ABS for the time being.

[img]http://i1243.photobucket.com/albums/gg545/sirmanlypowers/3d_printing/IMG_6495_zpssjaccmcy.jpg[/img]

My general intention is to make patterns of use in metal casting- either lost PLA style, or to make a RTV silcone mold of the plastic part and then make wax models for lost wax casting.
Here's a cylinder head I'm working on. I did a small scale test print followed by the full scale.

[img]http://i1243.photobucket.com/albums/gg545/sirmanlypowers/3d_printing/IMG_6501_zps17s3qy48.jpg[/img]

[Eaglezsoar]

Welcome to the Forum deadsy!
Great job on the printer and I want to thank you for purchasing the printer kit from SeemeCNC.
The prints that you have done look great! You did an excellent job of building and calibrating the printer.
Happy Printing!