) print fine. Any Ideas? Printing on a H-1 , With a 4-axis board. Using slic3r, and Linux CNC. I would really like to use KISS or CUDA but I just can't get it to work with LinuxCNC yet.Gaps between Infill and perimeters
Gaps between Infill and perimeters
Thought I had this problem solved, it only happens on about 5% of my prints. I am currently trying to print a printrbot base but there are gaps between the infill and perimeters. Only happening on this print and maybe 2 others, all my other prints , atleast 50 different models(I have been Busy ) print fine. Any Ideas? Printing on a H-1 , With a 4-axis board. Using slic3r, and Linux CNC. I would really like to use KISS or CUDA but I just can't get it to work with LinuxCNC yet.
) print fine. Any Ideas? Printing on a H-1 , With a 4-axis board. Using slic3r, and Linux CNC. I would really like to use KISS or CUDA but I just can't get it to work with LinuxCNC yet.
Re: Gaps between Infill and perimeters
A photo and description of orientation on the print bed would help. It might be backlash. Some printed part geometries aggravate a backash problem.
Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art
Start Here:
A Strategy for Successful (and Great) Prints
Strategies for Resolving Print Artifacts
The Eclectic Angler
Re: Gaps between Infill and perimeters
mhackney wrote:A photo and description of orientation on the print bed would help. It might be backlash. Some printed part geometries aggravate a backash problem.