Live Video Feed The PartDaddy

General info from SeeMeCNC HQ
Post Reply
User avatar
PartDaddy
Printmaster!
Posts: 374
Joined: Fri Mar 23, 2012 4:03 pm

Live Video Feed The PartDaddy

Post by PartDaddy »

We're streaming live. Google 'seemecnc dropcam' to watch. Up until DETROIT MAKER FAIRE, I'll be streaming live from dropcam 2 at SeeMeCNC headquarters.

Ask questions here! :D
~PartDaddy
SeeMeCNC Owner & Founder
Blackpoint Engineering is SeeMeCNC
Since 1996
brent
Printmaster!
Posts: 247
Joined: Fri Dec 06, 2013 10:24 pm
Location: Mass.

Re: Live Video Feed The PartDaddy

Post by brent »

All dropcams page: http://seemecnc.com/pages/dropcams" onclick="window.open(this.href);return false;
PartDaddy Dropcam (Cam #2) Direct Link: https://www.dropcam.com/e/68e2c34d5c554 ... 7c8a25e529" onclick="window.open(this.href);return false;
User avatar
PartDaddy
Printmaster!
Posts: 374
Joined: Fri Mar 23, 2012 4:03 pm

Re: Live Video Feed The PartDaddy

Post by PartDaddy »

Printing on the PartDaddy tonight before loading it up tomorrow.

https://video.nest.com/live/partdaddy" onclick="window.open(this.href);return false;
~PartDaddy
SeeMeCNC Owner & Founder
Blackpoint Engineering is SeeMeCNC
Since 1996
User avatar
bvandiepenbos
Printmaster!
Posts: 927
Joined: Thu Apr 05, 2012 11:25 pm
Location: Goshen, IN
Contact:

Re: Live Video Feed The PartDaddy

Post by bvandiepenbos »

PartDaddy wrote:Printing on the PartDaddy tonight before loading it up tomorrow.

https://video.nest.com/live/partdaddy" onclick="window.open(this.href);return false;
Kewl!
looks like a chair?

hey, I just had a thought... if the model had a intricate pattern on the surface it could look really cool, plus maybe hide some of the printers low res artifacts.
I am thinking a diamond checkering pattern like a gun stock or a basket weave.
Industrial "diamond plate" surface maybe?
or thousands of small SeeMe eyes perhaps :lol:
~*Brian V.

RostockMAX v2 (Stock)
MAX METAL "ShortyMAX"
MAX METAL Rostock MAX Printer Frame
NEMESIS Air Delta v1 & v2 -Aluminum delta printers
Rostock MAX "KITT" - Tri-Force Frame
GRABER i3 "Slim"
User avatar
PartDaddy
Printmaster!
Posts: 374
Joined: Fri Mar 23, 2012 4:03 pm

Re: Live Video Feed The PartDaddy

Post by PartDaddy »

The teddy bear print had a really neat texture. It looked almost soft, until you picked it up. I wonder what software was used to make that bear print (sorry, no link).
~PartDaddy
SeeMeCNC Owner & Founder
Blackpoint Engineering is SeeMeCNC
Since 1996
User avatar
bvandiepenbos
Printmaster!
Posts: 927
Joined: Thu Apr 05, 2012 11:25 pm
Location: Goshen, IN
Contact:

Re: Live Video Feed The PartDaddy

Post by bvandiepenbos »

PartDaddy wrote:The teddy bear print had a really neat texture. It looked almost soft, until you picked it up. I wonder what software was used to make that bear print (sorry, no link).
Meshmixer would work, but you would need to manually "stamp" the surface of model with pattern.
I am sure there is a better way to automagically apply a seamless tile pattern to surface of a model.
~*Brian V.

RostockMAX v2 (Stock)
MAX METAL "ShortyMAX"
MAX METAL Rostock MAX Printer Frame
NEMESIS Air Delta v1 & v2 -Aluminum delta printers
Rostock MAX "KITT" - Tri-Force Frame
GRABER i3 "Slim"
User avatar
PartDaddy
Printmaster!
Posts: 374
Joined: Fri Mar 23, 2012 4:03 pm

Re: Live Video Feed The PartDaddy

Post by PartDaddy »

I've wanted to try my hand at Rhino and Z brush - artsy fartsy stuff
~PartDaddy
SeeMeCNC Owner & Founder
Blackpoint Engineering is SeeMeCNC
Since 1996
jjjohnson
SeeMeCNC Staff
Posts: 36
Joined: Sat Jun 02, 2012 9:31 am
Location: Goshen, Indiana

Re: Live Video Feed The PartDaddy

Post by jjjohnson »

Here is the "fuzzy bear" that PartDaddy was talking about http://www.thingiverse.com/thing:71156
JJ
User avatar
Eaglezsoar
ULTIMATE 3D JEDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: Live Video Feed The PartDaddy

Post by Eaglezsoar »

PartDaddy wrote:The teddy bear print had a really neat texture. It looked almost soft, until you picked it up. I wonder what software was used to make that bear print (sorry, no link).
Small bears llc
User avatar
Eaglezsoar
ULTIMATE 3D JEDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: Live Video Feed The PartDaddy

Post by Eaglezsoar »

PartDaddy wrote:I've wanted to try my hand at Rhino and Z brush - artsy fartsy stuff
The Rhino can be found in Africa, the Z Brush can be found at any place selling brushes, the artsy fartsy stuff would best be found in an Italian Restaurant, they seem to pass the most gas.
Post Reply

Return to “General Announcments”