Welcome to the SeeMeCNC Community

MY ERIS 3D PRINTER IS NEW, I HAD THE CHANCE TO HAPPILY PRINT A COUPLE OF DAYS, THEN TO MY 3POINT LEVELING BED THE EXTRUDER STARTS TO MOVE AND GOES STUCK IN A ROD COLUMN AND STOPS. TO RETURN TO HOME POSITION I HAVE TO UNPLUG THE PRINER AND PLUG IT AGAIN AND THE' HOME ALL' COMAND WORKS WELL. I CAN PRINT NOTHING WITH LEVELING BED DISABLED,AND I TRY THE 3POINT LEVELING BED AND AGAIN THE EXTRUDER IS STUCK IN THE SAME ROD......AND SO ON. PLEASE SOMEONE HELP , I AM NEW IN 3D PRINTING AND GCODES ARE BEYOND MY UNDERSTANDING..... PLEASE HELP

Call support. That is why you paid the big bucks for the Eris. AND STOP YELLING!

What is this " 3POINT LEVELING BED"? Is this something from Mattercontrol? Or are you using the gcode file "FULL_CALIBRATION.txt" that SeeMeCNC wrote?

If support doesn't get to you quickly, or even if they do, could you give us a video of what you mean? Just film the printer and your screen as you start the leveling, and what it does. Beyond that, some advice

[img]http://i3.kym-cdn.com/photos/images/fac ... ldges1.jpg[/img]

Mac The Knife wrote:What is this " 3POINT LEVELING BED"? Is this something from Mattercontrol? Or are you using the gcode file "FULL_CALIBRATION.txt" that SeeMeCNC wrote?

I used many times the calibration gcode not succesfull, but now that i used it it changed the' home all axes' to x 3000, y 3000, z 3000 and extruders 150.He is not correctly homing now. that is new! I tried again the bed leveling (YES THE 3 POINT LEVELING SOFTWARE) and it worked but with the new home all axes. And he is returned 3d printing!!!!!! I am amaized. the extruder is printing a little to the right of the center of the bed but i can live with that Have a good day ! Well there are news , he printed the part but is deformed,it is twisted probably because of the wrong homing on x and y axes....I fixed the homing (EEPROM X WAS NOT 0) but now he is messing again with the leveling bed an i can not print....Well i tryed again and the leveling bed a success and is printing well .....do not ask me what happened, that i do not know,i guess the printer has his own life...

joe wrote:Call support. That is why you paid the big bucks for the Eris. AND STOP YELLING!

I call it and i am waiting for an answer .Stopping yelling for now. I TRIED BED LEVELING AND IT WORKED BUT IT CHANGED THE 0 HOMING. REGARDLESS, I TRIED TO PRINT AND IT WORKS!!!!!!! ITS ACTUALLY PRINTING BUT NOT IN THE CENTER OF THE BED SLIGTLY ON THE RIGHT SIDE OF THE BED WHERE THE NEW ' HOME ALL' IS. It prints but it prints a twisted part....I fixed the home command(G28) by changing the x value to 0 in EEProm settings, but now the leveling process is wrong again...... Then i tryed again and the bed leveling was good and the print was good....i am speachless for now.... crazy machine....

joe wrote:Call support. That is why you paid the big bucks for the Eris. AND STOP YELLING!

calling support. Have a good day !

Xenocrates wrote:If support doesn't get to you quickly, or even if they do, could you give us a video of what you mean? Just film the printer and your screen as you start the leveling, and what it does. Beyond that, some advice

[img]http://i3.kym-cdn.com/photos/images/fac ... ldges1.jpg[/img]

I am guessing that the electronics go wilde something is maybe heating and works improperly......