Steve's Sainsmart TPU profile?

Having a problem? Post it here and someone will be along shortly to help
Post Reply
Unknown Target
Prints-a-lot
Posts: 23
Joined: Thu May 28, 2020 11:01 pm

Steve's Sainsmart TPU profile?

Post by Unknown Target »

Hey all,

Steve @ SeeMeCNC said he's had good success with printing Sainsmart TPU. Have they released the profiles for that?

geneb
ULTIMATE 3D JEDI
Posts: 5119
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Steve's Sainsmart TPU profile?

Post by geneb »

They should be on SeeMeCNC's git repository here: https://www.github.com/seemecnc

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

Unknown Target
Prints-a-lot
Posts: 23
Joined: Thu May 28, 2020 11:01 pm

Re: Steve's Sainsmart TPU profile?

Post by Unknown Target »

Yea there's no TPU profile;

https://github.com/seemecnc/slicing-profiles/tree/master/SE300/Cura/Cura%204-6-1/SE300%20050%20Nozzle%20Stock%20Default

geneb
ULTIMATE 3D JEDI
Posts: 5119
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Steve's Sainsmart TPU profile?

Post by geneb »

I poked Steve - he should chime in soon.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

Post Reply

Return to “Troubleshooting”