What are the % for shrinkage in ABS, PLA.

User-Generated tips and tricks for the Rostock Max, Orion, H1.1, or H1 Printers
Post Reply
User avatar
Flateric
Printmaster!
Posts: 811
Joined: Fri Feb 15, 2013 4:35 pm
Location: Calgary, Alberta

What are the % for shrinkage in ABS, PLA.

Post by Flateric »

I have a customer that needs a very dimensionally accurate print and I am concerned about the shrinkage amount I may need to compensate for.
"Now you see why evil will always triumph! Because good is dumb." - Spaceballs
Top
Post Reply

Return to “General Tips 'N Tricks”