Stretch bracelet fused
Posted: Sat Dec 21, 2013 4:37 pm
Trying to print something like this for the 3rd time:
http://www.thingiverse.com/thing:13505/#files
But every time the inner ring fuses together....
Printing too hot?
Extrusion width too high?
Use smaller nozzle (printing w/ 0.4mm nozzle)?
Print bigger?
http://www.thingiverse.com/thing:13505/#files
But every time the inner ring fuses together....
Printing too hot?
Extrusion width too high?
Use smaller nozzle (printing w/ 0.4mm nozzle)?
Print bigger?
