Welcome to the SeeMeCNC Community

Posted: **Sun Mar 15, 2015 12:39 pm**

https://www.dropbox.com/sh/3evahzu5gfel ... _2.20?dl=0

Windows 32, 64 and Max. Linux to come soon.

Some new features for those support users! (gee, maybe I should check out what all the hoopla about support structures is all about!)

Changes from 2.16:
Arbitrary Z-gap is now allowed
Fixed a bug where the wipe and destring following support interface paths where at the wrong height when Z-Gap was used.
G-code summary at the end now includes per-extruder filament length (and volume) used.
Optimized object slicing with many small sub-meshes.
You can now add up to 5 layers of support interface on top of the raft.
Pressing delete anywhere in the model tab no longer deletes the model.
Fixed a bug where the animation slider would reset itself every second.
Fixed bug when Slice-and-Save is checked and we cancel the file selection.
Every-N-Layers now doesn't drag-value-change.
Added a squiggle-base to the prime pillar to help it adhere to the bed / raft.

Posted: **Sun Mar 15, 2015 12:56 pm**

Thanks for sharing

Posted: **Sun Mar 15, 2015 2:16 pm**

Agree, thank you!

Dan

Posted: **Sun Mar 15, 2015 7:14 pm**

I wish he would add something like the squiggle base for the prime pillar on the walls. Ive had the walls pop off the bed every once and a while.

Posted: **Sun Mar 15, 2015 7:17 pm**

Go to the forum and add a feature request. He is doing a good job of listening and implementing requested features.

Posted: **Wed Aug 26, 2015 5:07 pm**

Anybody have a copy of this? The dropbox link doesn't work. I checked the kisslicer-forum and there isn't a working link there either.

thanks.

Posted: **Wed Aug 26, 2015 7:44 pm**

Mhackney, are you involved with the development of this?

Posted: **Wed Aug 26, 2015 9:33 pm**

No, I'm not involved. I had started a good dialog with Jonathan earlier in the year and I thought might lead to a collaboration but then he went quiet again.

sandy, the dropbox link works fine for me so try again.

Posted: **Wed Aug 26, 2015 11:05 pm**

dropbox link worked for me.

Thanks for sharing Michael

Posted: **Sat Aug 29, 2015 10:02 pm**

Well thank anyway... Just bought S3D but Kiss does a far better job than any other slicer I've used... My only hesitation in purchasing it is that seemingly sporadic development. I should just buy it to encourage the guy - this beta is really nice and fixed my issues with it.

Welcome to the SeeMeCNC Community

3/15/2015 - new KISS beta 2.20 on Dropbox

3/15/2015 - new KISS beta 2.20 on Dropbox

Re: 3/15/2015 - new KISS beta 2.20 on Dropbox

Re: 3/15/2015 - new KISS beta 2.20 on Dropbox

Re: 3/15/2015 - new KISS beta 2.20 on Dropbox

Re: 3/15/2015 - new KISS beta 2.20 on Dropbox

Re: 3/15/2015 - new KISS beta 2.20 on Dropbox

Re: 3/15/2015 - new KISS beta 2.20 on Dropbox

Re: 3/15/2015 - new KISS beta 2.20 on Dropbox

Re: 3/15/2015 - new KISS beta 2.20 on Dropbox

Re: 3/15/2015 - new KISS beta 2.20 on Dropbox