Hey guys, one week into printing on my first 3D printer, RMV2. Quality has been great so far, this is the first taller print I've done and this is showing up, any ideas what's causing it? Assuming it's a mechanical issue.
[img]https://scontent-sea.xx.fbcdn.net/hphot ... e=554CEFD1[/img]
Repeating vertical issues
-
stonewater
- Printmaster!
- Posts: 345
- Joined: Mon Jan 06, 2014 1:24 am
Re: Repeating vertical issues
the banding is caused by loose cheapskates or effector arms, the vertical lines are a function of the slicer and your extruder settings. fix the mechanicals first. check it slowly and carefully.
Tom C
Tom C
MAX V1
325 MM carbon arms trick trucks effector mount LED ring heat spreader
Corvair750
V6 Hotend
Robo 3D
Flashforge creator
http://WWW.TeslagenX.com" onclick="window.open(this.href);return false; - Bedini experimenter kits, books, DVD's
325 MM carbon arms trick trucks effector mount LED ring heat spreader
Corvair750
V6 Hotend
Robo 3D
Flashforge creator
http://WWW.TeslagenX.com" onclick="window.open(this.href);return false; - Bedini experimenter kits, books, DVD's