Page 1 of 1
nema 11 geared - current configuration
Posted: Mon Nov 16, 2015 4:47 am
by duvdev
Hello,
I have an extruder with a geared nema 11 motor.
what is the correct value for the current that I need to place in the .h file?
from the datasheet it is rated as 0.67A
thanks
Re: nema 11 geared - current configuration
Posted: Mon Nov 16, 2015 7:48 am
by Jimustanguitar
Does it get too warm using the stock setting? I know there's a scientific way to do it right, but that'd be your first caveman indication that the factory setting wouldn't work.
Re: nema 11 geared - current configuration
Posted: Mon Nov 16, 2015 8:06 am
by duvdev
I don't know it get to warm because I have just finished assembling it and I making all the changes in the software
Re: nema 11 geared - current configuration
Posted: Mon Nov 16, 2015 8:17 am
by JFettig
quick google search brings me here:
http://reprap.org/wiki/Rambo_firmware#Motor_Current
What Nema 11 motor did you get? I've been eyeing up the 27:1