; generated by Slic3r 1.31.6-prusa3d-win64 on 2017-02-22 at 17:12:24

; external perimeters extrusion width = 0.50mm
; perimeters extrusion width = 0.72mm
; infill extrusion width = 0.72mm
; solid infill extrusion width = 0.72mm
; top infill extrusion width = 0.72mm

M107
M190 S60 ; set bed temperature and wait for it to be reached
M104 S200 ; set temperature
G28 ;home all axis
G1 Z5 F5000 ;move platform close to nozzle
M109 S200 ; set temperature and wait for it to be reached
G21 ; set units to millimeters
G90 ; use absolute coordinates
M82 ; use absolute distances for extrusion
G92 E0
G1 Z0.300 F6000.000
G1 E-2.00000 F2400.00000
G92 E0
G1 X-3.137 Y-9.205 F6000.000
G1 E2.00000 F2400.00000
G1 F1800
G1 X9.205 Y-9.205 E3.00753
G1 X9.205 Y9.205 E4.51038
G1 X-9.205 Y9.205 E6.01323
G1 X-9.205 Y-9.205 E7.51607
G1 X-3.212 Y-9.205 E8.00527
G1 X-3.212 Y-9.750 F6000.000
G1 F1800
G1 X9.750 Y-9.750 E8.70955
G1 X9.750 Y9.750 E9.76904
G1 X-9.750 Y9.750 E10.82853
G1 X-9.750 Y-9.750 E11.88802
G1 X-3.287 Y-9.750 E12.23916
G1 X-2.809 Y-9.455 F6000.000
G1 E10.23916 F2400.00000
G92 E0
G1 X8.943 Y-7.591 F6000.000
G1 E2.00000 F2400.00000
G1 F1800
G1 X7.886 Y-8.649 E2.12460
G1 X6.941 Y-8.649 E2.20333
G1 X8.649 Y-6.941 E2.40457
G1 X8.649 Y-5.996 E2.48330
G1 X5.996 Y-8.649 E2.79588
G1 X5.051 Y-8.649 E2.87461
G1 X8.649 Y-5.051 E3.29853
G1 X8.649 Y-4.107 E3.37726
G1 X4.107 Y-8.649 E3.91253
G1 X3.162 Y-8.649 E3.99126
G1 X8.649 Y-3.162 E4.63787
G1 X8.649 Y-2.217 E4.71660
G1 X2.217 Y-8.649 E5.47455
G1 X1.272 Y-8.649 E5.55328
G1 X8.649 Y-1.272 E6.42257
G1 X8.649 Y-0.327 E6.50130
G1 X0.327 Y-8.649 E7.48194
G1 X-0.618 Y-8.649 E7.56067
G1 X8.649 Y0.618 E8.65264
G1 X8.649 Y1.562 E8.73138
G1 X-1.562 Y-8.649 E9.93470
G1 X-2.507 Y-8.649 E10.01343
G1 X8.649 Y2.507 E11.32809
G1 X8.649 Y3.452 E11.40682
G1 X-3.452 Y-8.649 E12.83283
G1 X-4.397 Y-8.649 E12.91156
G1 X8.649 Y4.397 E14.44891
G1 X8.649 Y5.342 E14.52764
G1 X-5.342 Y-8.649 E16.17633
G1 X-6.287 Y-8.649 E16.25506
G1 X8.649 Y6.287 E18.01509
G1 X8.649 Y7.231 E18.09383
G1 X-7.231 Y-8.649 E19.96520
G1 X-8.176 Y-8.649 E20.04393
G1 X8.649 Y8.176 E22.02665
G1 X8.649 Y8.649 E22.06601
G1 X8.176 Y8.649 E22.10538
G1 X-8.649 Y-8.176 E24.08809
G1 X-8.649 Y-7.231 E24.16682
G1 X7.231 Y8.649 E26.03819
G1 X6.287 Y8.649 E26.11692
G1 X-8.649 Y-6.287 E27.87694
G1 X-8.649 Y-5.342 E27.95568
G1 X5.342 Y8.649 E29.60436
G1 X4.397 Y8.649 E29.68309
G1 X-8.649 Y-4.397 E31.22042
G1 X-8.649 Y-3.452 E31.29916
G1 X3.452 Y8.649 E32.72515
G1 X2.507 Y8.649 E32.80388
G1 X-8.649 Y-2.507 E34.11853
G1 X-8.649 Y-1.562 E34.19727
G1 X1.562 Y8.649 E35.40057
G1 X0.618 Y8.649 E35.47931
G1 X-8.649 Y-0.618 E36.57127
G1 X-8.649 Y0.327 E36.65000
G1 X-0.327 Y8.649 E37.63063
G1 X-1.272 Y8.649 E37.70936
G1 X-8.649 Y1.272 E38.57864
G1 X-8.649 Y2.217 E38.65737
G1 X-2.217 Y8.649 E39.41531
G1 X-3.162 Y8.649 E39.49404
G1 X-8.649 Y3.162 E40.14064
G1 X-8.649 Y4.107 E40.21937
G1 X-4.107 Y8.649 E40.75462
G1 X-5.051 Y8.649 E40.83335
G1 X-8.649 Y5.051 E41.25726
G1 X-8.649 Y5.996 E41.33599
G1 X-5.996 Y8.649 E41.64856
G1 X-6.941 Y8.649 E41.72729
G1 X-8.649 Y6.941 E41.92852
G1 X-8.649 Y7.886 E42.00725
G1 X-7.591 Y8.943 E42.13184
G1 E40.13184 F2400.00000
G92 E0 ; COMMENT THIS OUT to eliminate the blob at the end.
M104 S0 ; turn off temperature
G28 X0    ; home X axis
M84        ; disable motors
; filament used = 50.4mm (0.1cm3)

; avoid_crossing_perimeters = 0
; bed_shape = 131.774x13.85,129.605x27.5483,126.015x40.9448,121.045x53.8926,114.748x66.25,107.195x77.8815,98.4667x88.6598,88.6598x98.4667,77.8815x107.195,66.25x114.748,53.8926x121.045,40.9448x126.015,27.5483x129.605,13.85x131.774,0x132.5,-13.85x131.774,-27.5483x129.605,-40.9448x126.015,-53.8926x121.045,-66.25x114.748,-77.8815x107.195,-88.6598x98.4667,-98.4667x88.6598,-107.195x77.8815,-114.748x66.25,-121.045x53.8926,-126.015x40.9448,-129.605x27.5483,-131.774x13.85,-132.5x0,-131.774x-13.85,-129.605x-27.5483,-126.015x-40.9448,-121.045x-53.8926,-114.748x-66.25,-107.195x-77.8815,-98.4667x-88.6598,-88.6598x-98.4667,-77.8815x-107.195,-66.25x-114.748,-53.8926x-121.045,-40.9448x-126.015,-27.5483x-129.605,-13.85x-131.774,0x-132.5,13.85x-131.774,27.5483x-129.605,40.9448x-126.015,53.8926x-121.045,66.25x-114.748,77.8815x-107.195,88.6598x-98.4667,98.4667x-88.6598,107.195x-77.8815,114.748x-66.25,121.045x-53.8926,126.015x-40.9448,129.605x-27.5483,131.774x-13.85,132.5x0
; bed_temperature = 60
; before_layer_gcode = 
; bridge_acceleration = 0
; bridge_fan_speed = 100
; brim_width = 0
; complete_objects = 0
; cooling = 1
; default_acceleration = 0
; disable_fan_first_layers = 3
; duplicate_distance = 6
; end_gcode = M104 S0 ; turn off temperature\nG28 X0    ; home X axis\nM84        ; disable motors
; extruder_clearance_height = 20
; extruder_clearance_radius = 20
; extruder_offset = 0x0
; extrusion_axis = E
; extrusion_multiplier = 1
; fan_always_on = 0
; fan_below_layer_time = 60
; filament_colour = #E0E0E0
; filament_diameter = 1.75
; filament_max_volumetric_speed = 0
; filament_notes = ""
; first_layer_acceleration = 0
; first_layer_bed_temperature = 60
; first_layer_extrusion_width = 0
; first_layer_speed = 30
; first_layer_temperature = 200
; gcode_arcs = 0
; gcode_comments = 0
; gcode_flavor = reprap
; infill_acceleration = 0
; infill_first = 0
; layer_gcode = 
; max_fan_speed = 100
; max_print_speed = 80
; max_volumetric_extrusion_rate_slope_negative = 0
; max_volumetric_extrusion_rate_slope_positive = 0
; max_volumetric_speed = 0
; min_fan_speed = 35
; min_print_speed = 10
; min_skirt_length = 0
; notes = 
; nozzle_diameter = 0.5
; only_retract_when_crossing_perimeters = 1
; ooze_prevention = 0
; output_filename_format = [input_filename_base].gcode
; perimeter_acceleration = 0
; post_process = 
; pressure_advance = 0
; resolution = 0
; retract_before_travel = 2
; retract_layer_change = 0
; retract_length = 2
; retract_length_toolchange = 10
; retract_lift = 0
; retract_lift_above = 0
; retract_lift_below = 0
; retract_restart_extra = 0
; retract_restart_extra_toolchange = 0
; retract_speed = 40
; skirt_distance = 6
; skirt_height = 1
; skirts = 0
; slowdown_below_layer_time = 5
; spiral_vase = 0
; standby_temperature_delta = -5
; start_gcode = G28 ;home all axis\nG1 Z5 F5000 ;move platform close to nozzle
; temperature = 200
; threads = 2
; toolchange_gcode = 
; travel_speed = 100
; use_firmware_retraction = 0
; use_relative_e_distances = 0
; use_volumetric_e = 0
; wipe = 0
; z_offset = 0
; dont_support_bridges = 1
; extrusion_width = 0
; first_layer_height = 0.3
; infill_only_where_needed = 0
; interface_shells = 0
; layer_height = 0.3
; raft_layers = 0
; seam_position = random
; support_material = 0
; support_material_angle = 0
; support_material_buildplate_only = 0
; support_material_contact_distance = 0.2
; support_material_enforce_layers = 0
; support_material_extruder = 1
; support_material_extrusion_width = 0
; support_material_interface_extruder = 1
; support_material_interface_layers = 3
; support_material_interface_spacing = 0
; support_material_interface_speed = 100%
; support_material_pattern = pillars
; support_material_spacing = 2.5
; support_material_speed = 20
; support_material_threshold = 0
; support_material_with_sheath = 1
; xy_size_compensation = 0
; bottom_solid_layers = 2
; bridge_flow_ratio = 1
; bridge_speed = 60
; ensure_vertical_shell_thickness = 0
; external_fill_pattern = rectilinear
; external_perimeter_extrusion_width = 0
; external_perimeter_speed = 50%
; external_perimeters_first = 0
; extra_perimeters = 1
; fill_angle = 45
; fill_density = 100%
; fill_pattern = rectilinear
; gap_fill_speed = 20
; infill_every_layers = 1
; infill_extruder = 1
; infill_extrusion_width = 0
; infill_overlap = 15%
; infill_speed = 80
; overhangs = 1
; perimeter_extruder = 1
; perimeter_extrusion_width = 0
; perimeter_speed = 60
; perimeters = 2
; small_perimeter_speed = 15
; solid_infill_below_area = 70
; solid_infill_every_layers = 0
; solid_infill_extruder = 1
; solid_infill_extrusion_width = 0
; solid_infill_speed = 20
; thin_walls = 1
; top_infill_extrusion_width = 0
; top_solid_infill_speed = 15
; top_solid_layers = 2