Welcome to the SeeMeCNC Community

Such a board exists. I have the 4.3 in LCD panel that Filastruder offers to use with the paneldue. it has solder points for the header on the back (The manufacturer of the board, which is not DC42 or T3DP3D, has elected not to populate it as a cost saving measure), and could easily be connected to ...

The majority of folks do not have wired ethernet in their house, so they'd have to spend around that much on a wireless bridge to achieve network connectivity. I'm sorry that you desire wired connectivity, but the majority of folks wanted wifi. So it's better to leave off an option and screw a huge...

Full size connectors don't cost more than the micro connectors. Who said they did? Now I have to shell out $30 on top of the price of the board, spend a couple hours of valuable time installing and configuring stuff, not to mention the time wasted online collecting all these bits of kit... all beca...

2) SD Card - Poorly located socket, wrong physical form factor. http://www.ebay.com/itm/48CMTF-Micro-SD-To-SD-Card-Extension-Cable-Adapter-Flexible-Extender-For-Car-GPS-/371560450547 There's a solution for $4.50 shipped, relocate the socket to wherever you want, full SD size. 3) USB - Uses fragile ...

Anything special about the install for the titan? Looks like it should bolt right on. Just be sure to remove the collet from the heatsink (if 1.75mm) and use a just barely short enough piece of PTFE, so the Titan will push down on the PTFE and not leave a gap down in the heatbreak. bubbasnow, how's...

Can you also get them to ship you some of these , but without the useless brass parts? The plastic grippy things wear out, but I have no idea what the brass fitting is good for if you already have a hot end. E3D doesn't sell the collets separately, to me or through their website. I'm told that they...

Tim here, from Filastruder. I went ahead and added them to the site: https://www.filastruder.com/products/chimera-cyclops" onclick="window.open(this.href);return false; there’s now a “Cyclops Spare Nozzle” variant available. E3D only makes them in 0.4mm, though the request is in to have mo...

4.3" LCD, 7"LCD, Duet, Duex4, and PanelDue are all in stock, finally!

626Pilot wrote:Unfortunatley, Filastruder doesn't carry Cyclops nozzles, so I'm outta luck. I have to get them from E3D.

We do have spare Cyclops nozzles, just haven't listed them on the site yet. You can use the contact form to request some if you like. They're in stock, ready to ship.

https://miscsolutions.wordpress.com/min ... sor-board/" onclick="window.open(this.href);return false;

Yeah, I was in the middle of setting up the product and all kinds of strange things happen in that scenario. Should be squared away now. The pre-made cable is for folks that don't want to crimp their own. Its a balance between cost and time for the end user, for someone that has the tools on hand th...

Tracking shows the 7" arriving on Friday. I'll add it to the site now.

Duet, Duex4, PanelDue, and 4.3" LCD are all back in stock. Still waiting on the 7" LCDs.

Yes, Chinese New Year - sorry.

4.3" LCDs should be here this week. It looks like 7" LCDs won't ship until after the CNY.

Duex4 should be here in a couple weeks, along with resupply of the Duet as I'm down to 1 currently and will be out of stock soon.

EDIT: now OOS on Duet.

Both the Duet and PanelDue are now in stock, ready to ship. http://www.filastruder.com/products/duet-controller-v0-8-5" onclick="window.open(this.href);return false; http://www.filastruder.com/products/paneldue" onclick="window.open(this.href);return false; Would it be possible ...

Both the Duet and PanelDue are now in stock, ready to ship.

http://www.filastruder.com/products/due ... ler-v0-8-5" onclick="window.open(this.href);return false;

http://www.filastruder.com/products/paneldue" onclick="window.open(this.href);return false;

thanks for the clarification elmoret. the text on your beta page though still says that the screen is included is that right? does your board come with the cable or just the pins as seen in the lowe left photo at http://www.filastruder.com/products/paneldue" onclick="window.open(this.href...

There was some misunderstanding between David Crocker (maker of the PanelDue), Think3DPrint3D (maker of the Duet) and myself, resulting in me thinking that LCD screens were going to be provided when in fact they are not - this is just the controller board. I have adjusted the price accordingly, and ...

It hasn't been announced publicly, but I'm now carrying both of these products here in the USA. The Duet is in stock, and the PanelDue should be here late next week. http://www.filastruder.com/products/duet-controller-v0-8-5" onclick="window.open(this.href);return false; http://www.filast...

It hasn't been announced publicly, but I'm now carrying both of these products here in the USA. The Duet is in stock, and the PanelDue should be here late next week. http://www.filastruder.com/products/duet-controller-v0-8-5" onclick="window.open(this.href);return false; http://www.filastr...

Okay then, prices adjusted accordingly.

Hmm. I was told it was a v2, though upon further inspection it seems to have been partly converted from v1 to v2. For example, it has the extruder stepper mount shown here: http://www.seemecnc.com/products/full-upgrade-your-rostock-max-to-a-v2" onclick="window.open(this.href);return false;...

My printer collection is growing, and its time to make room for the newcomers. I'm selling the following printers: Solidoodle 3 - $300 shipped This guy has seen some stuff - like about 2500 hours of print time, and ~100kg of material. It has a Z-backlash mod, and comes with two swappable hotends - a...

E3D's thermocouples are now rated to 900C with fiber insulation.