Welcome to the SeeMeCNC Community

I would suggest to try and make your own antennas ,From my past experience they work much better than store bought. These are the three best guys for info that I have found to help you make the antenna correctly. The printable jigs work well. :ugeek: 1. Project blue falcon https://www.youtube.com/wa...

Yes I printed a few jigs and bend the shapes needed for the design of the antenna. As for the tiny whoop the frame is no concern of course ,but as for the Flight Controlller board I would run a F3 processor with Betaflight firmware . https://www.amazon.com/dp/B01M72IXMU if you use a spektrum radio t...

Is anyone still active on this Forum. I been building multirotor's since the 8bit processors and Arduino programming. I never noticed a forum here . Heck the biggest reason I bought my printer was to print parts for my own designs and friends who need things for their stuff lol. If there is any way ...

RocketMagnet wrote:Going to ask the obvious question first..... Command will be M303 S200 (NOT M303 200)

Thank you ...I am such a noob ....

I love my ORION ...Operator mistake more than often....It Just Prints ...

Just had exactly the same issue with my Orion and it was fixed with a PID tune. Instructions are in the Rostock Max V2 Build manual page 232 to 234 (though if your not used to Matter Control Software some pages prior are needed to see how to use the "terminal" which is used to run the aut...

Thank you .

I would like to know the default factory setting on diagonal rod length . I may have changed by mistake when adjusting the Horizontal radius. I have 178mm now

Those rings look amazing ...

I also bought a Orion as first printer .I myself am very tech savvy in the old and new ways (tool and die work,computers) . I wanted a machine that work right out of the box for my first one.I wanted to understand how it was supposed to work correctly . Learning printing , with any machine is an obs...

I have ordered my first roll of nylon . I have also just installed a new E3D v6 head on my Orion .Will post my results .

I will order the Max v2 soon 2 printers.... Yeeee haaaa the only way to melt more plastic ... Now I just have to sell a few Rc planes ...

I had a thermal runway and overheated my stock hot end. I just ordered the new parts and plan on rebuilding it after a complete inspection. While I was waiting I replaced it with a E3d v6 hot end. Just as easy as replacing the stock one. Now I will have and extra hot end ready to go on the shelf. I ...

Thanks so much your help . Any one use kisslicer ? what settings do i need to change here .I cant seam to find nozzle size any where . This may be what he is talking about . ** \/ ############################################################################### // ## Values for menu settings ## // ###...

OK I need help . i Have been looking all over on how I hook my computer up to arduino to configure for the new 3 E3D v6 hot end ?

ok i bit the bullet ordered the E3D v6 head this am .A Nice upgrade so I can print nylon . I understand you have to change the arduino code to get the max temp ?. Any suggestions would be Great , just waiting for the new AWESOME E3d and some different size extra nozzles ...wooot

I just had the same thing happen to me . No sure where to start. The connectors are crimped together . They seam to be loose in the two out side holes an also the thermocouple is loose . How do you reseat them .I think this is my problem. I was thinking of replacing the head with the E3D v6 hot end ...

I just received my printer in March and i have a total of 6 days and 6.18 hrs printing and the fan on the power supply is making alot of noise on start up . The bearings seam to be dry . Has anyone else had this problem? :o What should I do , I love my printer and dont want a surprise the next time ...

I haven't tried it yet, but I did see on thingiverse a mario bros theme for the rostock http://www.thingiverse.com/thing:133638 I wonder if you could create a library of gcode 'notes' to convert about any song into a print...hmmm... I have my Orion playing the Mario Bros theme . Just to play the so...

What slicer are you using ? ABS no fan lots of heat 225/230. Have you tried to load the .ini files for abs from SeeMeCNC to get a good starting point? http://download.seemecnc.com/orion/OrionUserManual-2ndEd.pdf" onclick="window.open(this.href);return false; the downloads are on page 50 ju...

Oh great I will give it a try .Thanks again EDIT works Awesome my Orion prints are great now ..

What settings do you use for kiss or cura to set up the printer in the slicer software. I have an Orion and i am struggling to get Kiss or cura To work for me. Thanks Fester

I have a small round brass dremal brush that i use to clean the outside of the nozzle in between prints , still looks like new. At some time I may use the brass polish method posted here to really shine her up.

For sure Great Job , This is exact reason I have my 3D printer . Late nights / Midnight's , Weekends you never know when the printer going to save the day .... Hakuna matata

TFMike wrote:Any chance you could give the details as to how you did this? Like what hinges were used, which brand and model of containers were used, what you used to cut them, etc....?

YET what he said ....lol

all done for today maybe late got some honey do chores. I will send my config files also just pressed for time now