Welcome to the SeeMeCNC Community

I attached file also.

Here is the Config file. No override file on card. # Robot module configurations : general handling of movement G-codes and slicing into moves # By 626Pilot of the SeeMeCNC forums, based on mhackney's default file & reorganized for quicker editing # Thanks to Polygonhell and Flateric for the hel...

Ok, thanks

Here is a possible laser option.
http://hackaday.com/2014/03/29/hacking- ... asy-steps/" onclick="window.open(this.href);return false;

Ran the G29 it worked great, G32 worked great, G31 O P Q R S locked up the board after first probe. All the leds went green.
Azteeg x5.

Thank you for working on this, I have my X5 up and running (not printing yet), just ran the current Zprobe stuff available on smoothieware and it changed the radius from 133.05 to 133.107 so my calibration was close. As soon as I can get your firmware I will try it.

Works great, Thanks for the hard work.

DId you have any issues with hotend temp? I used the Semitec in config file but hotend is still 20C colder than the Rambo.

After hours of bad results during extensive calibration process, I found an embarrassing problem. I was in the middle of a 20mm hollow box print and I went to get another hard cider and I bumped the table the printer is on as I went by. I came back and found my part was now printing at a slight angl...

I will try by this weekend.

...and the reel .

Here is the printer after further calibration and adding PEI to the bed (maybe the least enjoyable task ever).
https://www.youtube.com/watch?v=hPjmnbNEQPM" onclick="window.open(this.href);return false;
and a lower in clear ABS from last night.
.2 layer height.

ABS, I have just started with Nylon bridge filament also, I will be getting some carbon fiber abs this week. I am building an enclosure to limit the warp, I will post pics of results.

I added a E3d v6 and the laser CF arms. Prints beautiful.
http://youtu.be/nhP7Xr8Okr8" onclick="window.open(this.href);return false;