Welcome to the SeeMeCNC Community

We'd be fools to think that Johnny and the crew at Ultimachine weren't working on some kind of super rambo. I've heard some rumors... I'm sure they'll have a Due or ARM based contender soon.

Yes they have, but until Seeme adds firmware for this, Marlin is your only choice.

Going with the duet wifi over the Archim v0.3, pm if you want to buy one for a reasonable price.

I am using the original Rambo board because I installed the new hotend from Seeme and at the time it is what would work with the accelo probing. I think I will sell this board and use a Duet wifi with Mhackney's hack. I love the probing stuff DC42 has with his latest update. The graphic representati...

I contacted ultimaker and got on a list to get a beta version. They did send me an email and it is using marlin FW, but I am hoping this will be the choice that seeme will use in the future since they posted a video of a max v3 running this board.

I remember a video of a Max running this control, what firmware did you use? I just ordered one. I was going to upgrade to a Duet wifi but I like the new hot end and probe and decided to wait for this control.

Thanks for the input, it lead me to check some things. I found that the Max V3 firmware is set up for 375mm max on the Z axis. I had set z zero manually and that was 347mm, so the first probes used this number. Then when it probed for Z height it used the max z in firmware the establish the height w...

Hello, I have upgraded a Max V2 to the H280 with accelerometer probe. I have made sure that my firmware is adjusted for smaller pulleys (16 teeth) and measured z movement to make 1mm of commanded movement= 1mm measured. The calibration goes as planned for the tower measurements but when it goes to m...

So is this a digital signal, like edge triggering?

The HE280 hot end is controller-agnostic. It's the accellerometer based probing board that support would have to be added for.

g.

Ok..... Thank you.

I have a 0.85 & 7" PanelDue running on a cartesian printer and I liked it so much I went with the Duet Wifi for an upgrade on my Max V2. I will start next week.

Has anyone tried to use the HE280 with the DC42 or rerap firmwares? I thought I read that it is I2C for the probing.

I just tried to get the card setup with all the stuff for the max 2 and never made it through the Octoprint phase.

I am selling this card, I hate OctoPrint and using raspberry pi and all of the hours I spent trying to get this crap working. If you like spending time typing crap into a terminal and find every possible way your firewall will stop this convoluted system to get wireless printing, this is the system ...

Looks great. Just ordered one.

I will buy one.

Only abs so far, I have some bridge that I will try and post results.

If the part size allows for thicker layers more than twice as fast. .2 layer with a .4 nozzle vs .65 layer with .8 nozzle at the same print speed. Why print a part with high resolution with half the strength when you are going to bolt a motor to it? Printing parts that need to look good put in a sma...

First print after: 1. Trick laser skate upgrade 2. 24v power supply 3. E3D volcano using .8mm nozzle .65 layer height 4. printinz (ninja plate) print surface 5. Azteeg X5 smoothieboard variant X5 works great, I had to solder pins for fast decay. 1/32 micro steps is nice, using 626Pilot's(Seeme CNC f...

smooth deceleration ?
zprobe.decelerate_on_trigger, Comment this out?

I hate Pronterface, had nothing but face palms and double face palms. got repieter host working and now all the weird crashes are no more. I not saying it was the software, just my lack of familiarity with setup. I did crash head into bed several times, which I had not done in the past.

The panel has some effect, disabled and unplugged viki2 and made it 5 probes then locked. 18:17:47.256 : 18:17:47.256 : [HC] Heuristic calibration in progress. Press Reset to abort. 18:17:47.256 : [HC] /!\ PROBE CRASH DANGER /!\ Don't press buttons, send commands, or access the SD card. 18:17:47.256...

I am running a HP poweredge 6800 12v 100amp power supply, I do not think my problem is power.

Could the viki2 be hogging to much memory or processing power?

When I took the entire config sample from git and made changes only for viki2 and other setting for bed and hotend, the crash happened before the first probe but z moved towards the bed 2 inches, the first config fie that I copy and pasted to, the crash was after the first probe. I am printing your ...

I ran G29 and G32 then G31 A it worked fine. I will include Overide and map file