Welcome to the SeeMeCNC Community

Are you running the 3.4.4 firmware? If not, it cures a lot of weird little calibration issues - just make sure to no use the bed mapping function as that's still problematic. The instructions for that are here: https://docs.google.com/document/d/1IQf191FP7EgV8IRpa__jZviF_lfd1jcKVwHD2J7U9pw/edit?usp=...

There's something yeeted on the mail sending side and PM notifications don't go out via email, so it's entirely possible that PartDaddy doesn't even know he's got a PM.

g.

Here's the instructions https://docs.google.com/document/d/1IQf ... share_link
It's for 3.4.4, the title isn't updated.

Sending PMs likely won't work quickly - fastest is to email [email protected] directly.

g.

I pointed PartDaddy at this so he can chime in.

g.

PartDaddy does recommend an update to 3.4.4, but don't use the mesh compensation. It causes issues sometimes.

I've had constant problems with my Rostock MAX v4 until I went to 3.4.4. It's been a lot better since then.

g.

Um, no.

g.

That's not testing the output of the power supply.

Did you make any changes to the printer prior to the problem manifesting itself? (uploading firmware, etc.)

g.

I would check the output of the power supply.

g.

The fuse locations can be found here: https://docs.duet3d.com/Duet3D_hardware/Duet_2_family/Duet_2_WiFi_Ethernet_Hardware_Overview look at the "features" section - the fuses are shown with a red highlight and they're on the right side of the board. I would also check to make sure that the ...

If the spring was causing problems, it means that the balls needed to be lubricated. I would lubricate all the ball joints with a little white lithium grease and then replace that spring. When the probing is too fast, you'll get a warning message in the web interface about the probe results being in...

Run the delta calibration twice (g32) and then print. How does it look? (don't use bed mapping)

g.

I've got a similar issue with my v4. Are you seeing that after a normal delta cal, or after you've done a height map? How does it print without the height map?

I've pinged Part Daddy on this, so hopefully he'll stick his nose in soon.

g.

Then you need to make the same adjustment for the extruder drives.

g.

Twingert, assuming you're using the WiFi interface, look here: https://github.com/seemecnc/RostockMAX-v4/tree/master/SD%20Wifi All the configuration settings for your machine should be in there - the items that will affect your homing direction are in the M569 commands. Do you have S0 set for the fi...

\o/

Looks like some great deals! I'm sorry to see you're closing!

I fixed the url in your post - it ended "..caFor".

g.

Great!

g.

They're kind of hard to brick. It's more likely that the either the wrong firmware was uploaded, or the right firmware with the wrong configuration was uploaded. You can grab the firmware from here: https://github.com/seemecnc/Firmware/tree/master/Repetier%20Firmware Go through the Configuration.h f...

The plugin may need to be updated for the latest Octoprint. I don't have the time to do it, sorry.

g.

I have no idea, sorry. You might want to ask Part Daddy directly.

g.

It absolutely is.

g.

It hasn't been discussed here. It's basically a dick move on Flashforge's part.

g.

What happens when you flip the glass over? Same result?

g.

The delrin balls were the first version. The aluminum didn't come until much later. There's no reason I know of to prefer the Delrin version, but you might want to email them about it.

You might want to let them know about the URL issue.

g.