Welcome to the SeeMeCNC Community

Also, from the groundbreaking for our new engineering building:

https://www.flickr.com/photos/msudenver ... 9629171291" onclick="window.open(this.href);return false;

Hey guys, I tried like hell to get you more screen time on this one, but we only got a little bit with both the RoStock MAX V2 and DropLit for this CNBC story: https://youtu.be/-A2Uk2MAgRw?t=585" onclick="window.open(this.href);return false; (I'm the guy in the grey shirt and glasses runni...

An overlooked step: "installing the carriage", the step attaching the Carriage Plate to the DL Carriage Plate w/ two pan head screws (heads of which are shown in Fig 5-31). Had a student assemble based on version 0.5 of the manual; their absence wasn't noticed until I found a locknut in th...

What version are you on? 1.0.0.75 has a different slicing profile interface

I do have some particularly soft filament right now and the issue is that it's soooo soft that it gets squished by the hobbed roller then wont fit through the opening of the bowden tube anyway :( After I ground the stock roller smooth with a spool of CF-PLA and a 27 hour (failed) print, we replaced...

Hello all, Wil Carver from Denver here, otherwise known as wcarver1. I'm a long-winded manufacturing engineer and ex-CTO from the aerospace industry, currently working for MSU Denver on an advanced manufacturing grant. We're incorporating advanced manufacturing into the base engineering curriculum, ...

I was going to post about this earlier, thanks for the reminder. Even using AutoCalc, you'll still likely experience this problem. The issue is that AutoCalc doesn't properly calculate the change in 'lift and sequence time' caused by differences in the Bottom Layers. (e.g., exposure time, z lift spe...