Welcome to the SeeMeCNC Community

I'm starting to suspect this most recent problem was a pinched wire. I hadn't pulled the wire all the way back through when I reassembled it, and after doing so it appears to be functioning. That being said, would you recommend upgrading the power supply to better handle the Onyx bed? I'm currently...

would you mind sharing the process for the sharpie piece??? also what colored PLA is that? thanks Hi Dunginhawk, The material is Natural PLA from Micro Center, the brand is Toner plastics, it's the best I've used(especially for the price).For the colored vessel I just marked the filament right befo...

Hi rpress, I'm really curious about that kit, I've been looking at the trick laser arms but if the kit is the same, I think I might do that. A few questions though..
How difficult was the kit to put together?
Does it come with everything needed? If not, what else should I buy to complete?

DSC04086.JPG DSC04092.JPG DSC04090.JPG A few of my PLA prints. The Max v2 seems to do really well with thin walled vessels. I'm loving this printer,now I need to get ABS to behave like PLA. Yes vases are a bit boring but I think they're nice to really get acquainted with the slicers in Matter Contr...

Hi rehabmax, great choice on the Max v2, you'll love this printer! I got some great input on here before making my order. A few of the things that really helped me.. Many on the forum recommended upgrading the PEEK fan immediately, they also recommend upgrading the Rambo fan, I did both and haven't ...

+1 on the cheapskate adjustment. I went back after my first few prints and re torqued any screw I could get to as well. I found that I was a bit light handed during the initial assembly process. It still feels great to get that first print out after all of the invested hours!

Hi All, I decided to try using sli3er today as I've primarily used matter slicer at this point. I can't seem to find the usual bed and nozzle settings under the "filament" tab. Is this in another location? I can't seem to find it anywhere when I choose sli3er as my slicer.

Looks great! Where did you buy the cabinet? I've been looking lately and I'm wanting to do something like this.

One way to do it once your computer is connected via Matter control
Import "Add" STL to matter control
View the part.. Edit if needed
Export as G code then save to SD card
SD card slot is on left hand side of LCD panel, you can then select a file from the SD card

+1 on making sure that you measure 8" from the front of the machine. Also be sure that the top panel goes on in the correct orientation. Mine did not but I was still able to mount my ezstruder and route my filament through a hole I drilled. And yes, I would look into a new PSU before you start ...

What type of cam are you using?

Hi Eaglezsoar, I attached the fans with Velcro so I can move if needed.I routed the wiring under the base, it currently comes out where the lexan piece bends out a bit from the bottom base. I think I'm going to clean up the wiring and wire them to my existing layer fan wiring today.I tried several c...

I'm posting a few images of what I've added in the last few days. It took me a bit to get PLA dialed in. You can see in the image that I had to add 3 80 mm layer fans. This has made a huge difference in the quality of my PLA prints. I salvaged 2 from the Diablotek PSU that went out during calibratio...

Hi JFettig. Just wanted to say thanks for making this stl available. Printed one out this morning and the fit is superb, seems to be cooling much better than my my original configuration.

That's good to know that your Corsair is going on 7 years, I'm hoping that this EVGA gives me at least 3-4 good years, we'll see...

Hi Xnaron. I have one fan though it doesn't seem to be blowing much. It's larger one that I put on, someone on the forum recommended this. It seems to be spinning really slowly. I have a few smaller fans sitting around with printed shrouds. Can I just tap into the existing wiring to add more?

IMG_3444.jpg IMG_3441.jpg IMG_3440.jpg Thought I'd give this a shot. I'm somewhat happy with the outer perimeters but it's a bit blobby on the inner area.It's printed at 198, 60c bed-.20 layer height and 4.5mm retracts.It seems no matter what I do, I can't get pointy areas to work. I have uploaded ...

Very well could be the PSU, my Diablotek went out during calibration. Upon recommendation from JJ of seemecnc, I was able to print my ABS fan shroud without using the heated bed. This worked fine for me until I got my replacement. I bought an EVGA 650w modular and the problems are gone. They sent a ...

Thanks for the help guys. I went in and retightened things, it seems that I wasn't as heavy handed as I usually am when I assembled this printer. I found few things that required a few more turns. I also found another curious thing.. I found that the top of the plastic delta arm hits the hex head bo...

IMG_3414.jpg IMG_3417.jpg IMG_3422.jpg Any ideas on what settings I should try to alleviate the problems in the images.In one image, you can see a vertical line.. What might cause this? In the other, I'm assuming this is layer shift but don't know for sure. If it is layer shift, what causes this? I...

Thanks! I Completely overlooked the U.S filter

Thanks for the help guys. I just looked on ebay and I'm finding an abundance of options from Hong Kong and China, I'll order a few from them if all else fails..Any chance that any of you may have a link to US based source?

Thanks Eaglezsoar and Bentherighteous, I re wrapped the hot end with about 6 more layers of 1/2 inch Kapton tape and the difference is night and day! I really can't believe that it made that much of a difference. The first time I re wrapped, the Kapton fell off due to an insufficient wrapping job, t...

Hello All, I've had nothing but questions lately.. Hoping to be able to contribute soon. If my target temp is 230 the hotend will hover between 224-226 and maybe 227.1 at times. If I set a target temp for 240 the temp will then actually go to 227-229 but not higher. Has anyone had this happen and ha...

I third that! I like that design, my shroud now only seems to cool 1/2 of the material.