Welcome to the SeeMeCNC Community

Thank you!

[youtube]http://www.youtube.com/watch?v=_O1hM-k3aUY[/youtube]

Hmmm...still didn't work...closer though!

On that note, if you see anything different in the next few days that DOESNT work, post it here so I can look at it Hi johnoly99, thanks much for your work! Do the [youtube][/youtube] tags work? I seem to have difficulty with them. I'm following this information I found, but they don't seem to work...

Very Sad. I used the dark theme as well.

[img]https://media.giphy.com/media/3oAt21Fnr ... /giphy.gif[/img]

I'm just throwing out a guess here, but I'd say your hotend is not hot enough. Perhaps your thermistor is giving bad readings? Other place I'd look is to ensure that the filament path is clear and easy to move through from spool to print head. Any resistance is one more thing the EZstruder has to pu...

They really look great! Nice work!

PEI works for me! ABS 235C/95c-300mm tall on a 22mm by 22mm raft. I could never do that with gluesticks.

[img]http://www.perrydice.com/images/20x20x300.png[/img]
[img]http://www.perrydice.com/images/20x20x300close.png[/img]

Thanks much mhackney! your explaination clarified the process greatly! I'll get it all together tomorrow and post my results.

This is from another post, but I thought it was different enough to have it's own thread... How do you implement Grid Compensation on a Max V2 with the Duet 0.85 and firmware 1.17RC1/DWC 1.13? What I've done so far is: 1. Removed bed.g 2. Added M557 R150 S25 to config.g 3. Modified the reprap.htm f...

Sorry it's been a while since the last update. [img]http://www.perrydice.com/images/rostock_enclosure.png[/img] As you can see from the picture, I've had to make some modifications since last time I posted. Mods include: 1. Changed the way the filament feeds from the top sides to a more direct path ...

Most of the info I needed to update my Duet was located here: https://duet3d.com/wiki/Duet_Wifi_Wiki#Initial_configuration_.28Duet_.26_Duet_WiFi.29 and here: https://duet3d.com/wiki/Where_to_get_Duet_and_Duet_WiFi_firmware_and_tools - I read that since the recent versions the firmware can be updated...

Super excited to see this new version of a great printer!

Looks Great!

I'm getting ready to convert my machine to a duet, and am wondering if somebody can help explain what I am seeing. I flashed both my duet board and Paneldue to v1.14 successfully, but when I connect my PanelDue to my Duet and power both boards via USB connected to the Duet, The PanelDue screen blin...

Hi dmo. I actually had a similar issue when converting to the Duet. I had to completely rewire (or swap wires) the connection from each motor to the board. I don't remember what the exact combination or appropriate connections are right off the top of my head, but I can check for you when I get back...

Here's my latest effort. (Please don't mind the colors...It's what I have a bunch of, so I'm using it up...) So far the wipe shield is working best for me in Mattercontrol using Matterslice. This vase is in ABS and took about 20 hours to print along with it's wipe shield. [img]http://www.perrydice.c...

Amazing build and great work!

Here is Marvin again. This time in his wipe shield. The colors were better this time, but still not where they need to be. I may need to increase the layers from 2 to 3 to help with the color bleed through... [img]http://www.perrydice.com/images/marvinadvanced2shell.png[/img] [img]http://www.perrydi...

I'm testing my new Diamond/Duet setup as well. Here are my results so far: Everything is configured/sliced in Mattercontrol using Matterslice. [img]http://www.perrydice.com/images/greenfrog.png[/img] The Green Frog was my very first Multicolor print on the new setup, and came out surprisingly well g...

Thanks dc42. Reading more into Configuring and calibrating a delta printer using the dc42 fork of RepRapFirmware, I see where G30 S7 can be a problem. I readjusted M665 L269 in the config.g, changed my bed.g to G30 S6, and focused on getting my endstops physically (rather than through software) as c...

Still having a little issue with Dimensional Accuracy....Everything is a bit small by about .975. I'm working through 626pilot's post now to correct the issue. I'm sure its related to the M665 L parameter (diagonal rod length) being not quite right, and the auto calibration is not correcting the iss...

Sorry this has taken so long! Summer is here! Here is my status as of today... [img]http://www.perrydice.com/images/rostock-recon7.png[/img] [img]http://www.perrydice.com/images/rostock-recon8.png[/img] [img]http://www.perrydice.com/images/rostock-recon9.png[/img] [img]http://www.perrydice.com/image...

Day 3 & 4-I got the bottom pretty much buttoned up, and power tested.
[img]http://www.perrydice.com/images/rostock-recon6.jpg[/img]

Day 2 of the Reconstruction:
[img]http://www.perrydice.com/images/rostock-recon3.jpg[/img]
[img]http://www.perrydice.com/images/rostock-recon4.jpg[/img]
[img]http://www.perrydice.com/images/rostock-recon5.jpg[/img]