Welcome to the SeeMeCNC Community

/* Printer Model List as used throughout this firmware Orion = 1 Rostock Max V2 = 2 ERIS = 3 Rostock MAX v3 = 5 Hacker H2 = 6 */ // ### Define your Printer Model here! ### #define PRINTER 2 // SeeMeCNC Bowden w/PEEK barrel = 1 // HE240 on ERIS w/accel probe = 2 // HE280 w/accel probe = 3 #define HOT...

Im mislabelling it then. In the manual, the first print is a PEEK fan shroud that the fan mounts to. That fan isn't working now. It's proper name is probably a hot end fan

Yes

I've submitted a ticket and, as you have seen, I've dropped a few lines in other parts of the forum looking for a replacement. I do have another issue though. I updated to the latest version of the firmware for the V2, and now on preheat the extruder cooler does not turn on. I used a multimeter, and...

If this is still available i definitely want the heated bed assembly. Mine isnt looking so hot. Send me a text or call 1 304 373 3849.

Hi. Thanks for the reply. It was indeed a broken curcuit at the bottom of the heated bed. Is it possible to buy a replacement for the onyx rev7?

Hi, Ive had my V2 since 2015, its been a wonderful time together, but lately im having an issue i cant solve. If the bed gets a current put to it ( to preheat) the software crashes. This is not random, it happens every time. the fuses on the RAMBo are fine, the wiring is not decaying. I recently upd...

ive been setting the temps using the preheat function in the drop down menu. i used mattercontrol, the seemecnc version for the rest of the time, it would heat the hot end. i have 5 days of print time and have tested the temps at the nozzle using a temp gun, they are within the standard sigma(error ...

hi all, i just put up a mount for GoPros with accessories on the back, such as extended batteries and screens and such. the mount allows you to also use a chest harness without the GoPro being angled. All questions welcomed.

http://www.thingiverse.com/thing:1766537

hi all, so far I've amassed 5 days of print time on my rostock max v2 rev. 3. In that time, I've used simplify 3d almost exclusively, but there is a problem. I have my hot end set to T0, but simplify 3d will no heat it. it heats the bed, and set points work for the bed, but it would appear the hot e...

hey everyone, I've had this up on thingiverse for a bit, and figured its would be good for the community. The design improves on the original, and removes the need for extra layer fans. http://www.thingiverse.com/thing:1377757" onclick="window.open(this.href);return false;

the temperature did set to 100 celsius, but the the towers only home'd, they did no move down to the build plate

Hello everyone, I recently finished my Rostock Max V2 Rev. 3 and I'm having a terrible time getting prints to work. The problem would appear to either be in Configuration.h, or my slicing software. I have tried Cura, and Simplify3D, but when the print starts, the nozzle crashes in to the build plate...