Welcome to the SeeMeCNC Community

I just finished my conversion, making a sole/separate hotend so that I could revert as you speak to. Here's the complete build and BOM: http://www.thingiverse.com/thing:2122793 The only thing I couldn't source was the PCB cover. I wound up printing one off of the github in Form 2 Clear resin. The o...

I had similar problems and seemecnc worked with me till it was resolved. The Rambo board will work fine. Just get the right firmware from the master branch of their repo. It took me a while the first time I did it but it's really easy.

I also have these installed on the fans. I had to scale X & Y up by 2% in order to get them to fit tho as printed at the size of the STL wasn't letting them fit on the fans. http://www.thingiverse.com/thing:2111326 They seem to be doing a good job, my bed temp doesn't drop anymore with the fans ...

Here's a pic of everything I got with the e3dv6.

Hi all, I've decided that I want to try the E3Dv6 hotend on my Rostock v3. I have ordered the parts, and printed the following files from Thingiverse. www.thingiverse.com/thing:2098268 I really like the accelerometer probe, and I am getting great first layer heights, but the spiderwebs have been a b...

Thanks Steve and the guys at SeeMeCNC. They ran me thru this wizard, and I couldn't be happier. I had to drop my z-probe max height from -.20 to -.10, and that solved any other little misc problems I was having.

The manual wizard worked great for me!

Wade

Here are some results from eeprom.

Tower X endstop offset [steps]|20
Tower Y endstop offset [steps]|0
Tower Z endstop offset [steps]|128

Ran another g29

Got these results:
Tower X endstop offset [steps]|17
Tower Y endstop offset [steps]|0
Tower Z endstop offset [steps]|127

Hello everyone, I have been trying the various versions of firmware because I have been having bed leveling issues as well. The new dev branch I downloaded about 20 minutes ago appears to be better, but there are still leveling issues. Michael Hackley suggested I post my results here. I did not see ...

Greetings all! Just got my Rostock v3 on Friday.

Had some challenges, but so far, loving it. Print quality is fantastic.

Still need to figure out how to calibrate it a bit tho. Did a 20mm cube, and am getting 19mm cube instead.

Cheers!
Wade