Welcome to the SeeMeCNC Community

Found the problem, that was EXACTLY the correct command but the Duet never got it. Here's why....the PanelDue was not talking to the Duet board. The "Connecting" in the upper right hand corner does NOT refer to the WiFi, it refers to the internal connection between the panel and the contro...

I recently changed routers and while the new router uses the same SSID and password as the old one, my Artemis 300 can't seem to join the network (even though all the other wifi devices made the switch with no attention required). To try to clear it up I executed the following commands from the Cons...

Well, with no replies in amonth I thought I'd leave a few breadcrumbs for others....check out http://forum.seemecnc.com/viewtopic.php ... 31#p110231 for more information...

Well, after nearly a month and no replies I thought I'd post a solution in case anyone comes to the zombie thread here and needs the info in the future. YES it's possible to print PLA with PVA supports but there are some challenges. The biggest challenge is that you usually want to print your PLA at...

@alexzogh - I think you're right for dual color printing. The Dual Extrusion Wizard will want two processes, one for the "left extruder" and one for the "right extruder." In reality there's only one extruder on the Artemis, and you're using the tool change command to extract the ...

Hi all! New to the forum but not to the 3D printing world...our small company does 3D printing for short run parts, custom jobs, etc. For our other printers we use Simplify3D to generate our gcode from STL files. Several jobs need a combination of PLA materials with PVA supports, and S3D does a grea...

Good to be here! Our small company Blue Roof Labs has ordered an Artemis 300 to do dual extrusion work making short run parts, fixturing, casting cores, etc. This printer will be adding to a Felix Pro2Touch that we program with Simplify3d. Can anyone suggest a Simplify3D profile for the Artemis? I'l...