Duet 3 demo at TCT
Posted: Fri Oct 05, 2018 4:00 pm
In case any of you missed it, we were showing off the Duet 3 main board and expansion board prototypes at TCT last month.
https://m.youtube.com/watch?v=LaNYeQiZK9M
The motors on the left are NEMA 17, the ones in the middle NEMA 23 and the ones on the right NEMA 34.
Duet 3 is aimed at high end systems requiring large numbers of stepper drivers and/or intelligent tools. So it's not directly relevant to owners of SeeMeCNC machines. Production won't start until next year, and the Duet 2 WiFi/Ethernet will continue to be our mainstream products.
https://m.youtube.com/watch?v=LaNYeQiZK9M
The motors on the left are NEMA 17, the ones in the middle NEMA 23 and the ones on the right NEMA 34.
Duet 3 is aimed at high end systems requiring large numbers of stepper drivers and/or intelligent tools. So it's not directly relevant to owners of SeeMeCNC machines. Production won't start until next year, and the Duet 2 WiFi/Ethernet will continue to be our mainstream products.