Firmware for duet 2 wifi not working

Post Reply
wellthad
Plasticator
Posts: 7
Joined: Thu Apr 22, 2021 9:45 pm

Firmware for duet 2 wifi not working

Post by wellthad »

I have successfully installed the board the motors the new hot end and now I'm doing the firmware. I used rostock max v3.2 master files. I try to update firmware with M997 S0:1 and it gives me an error. None of the movement controls work if I try probing or just trying to move on an axis. I'm not sure what I'm missing.
wellthad
Plasticator
Posts: 7
Joined: Thu Apr 22, 2021 9:45 pm

Re: Firmware for duet 2 wifi not working

Post by wellthad »

I can actually update the firmware now but after doing so I try going try first probe and it gives me more errors.
wellthad
Plasticator
Posts: 7
Joined: Thu Apr 22, 2021 9:45 pm

Re: Firmware for duet 2 wifi not working

Post by wellthad »

I think I got it but I'm getting height map error and it says I'm using S parameters when I should be using H parameters. I have no idea how to change that.
geneb
ULTIMATE 3D JEDI
Posts: 5236
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Firmware for duet 2 wifi not working

Post by geneb »

Screenshots of errors would be a big help in assisting your problem diagnosis. ;)

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Post Reply

Return to “Duet”