Is the Bowden Coupler removable from EZ struder adapters?

The new for 2016 RostockMAX v3!
Post Reply
gamekorp
Noob
Posts: 2
Joined: Fri Sep 22, 2017 1:05 am

Is the Bowden Coupler removable from EZ struder adapters?

Post by gamekorp »

Hi,

Is the actual 'coupler' part removable so it can be replaced? I don't mean the full assembly which requires the PTC tool, I mean just the coupler with the teeth from that assembly?

How can I remove this coupler? ( I want to try a different coupler as I keep getting pucking pucks )

Thank you.
geneb
ULTIMATE 3D JEDI
Posts: 5362
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Is the Bowden Coupler removable from EZ struder adapters?

Post by geneb »

If you're talking about the bit that's got the push fit teeth inside of it, then yes that whole thing can be removed - it's threaded. Just remove the bowden tube from the EZ Struder and unscrew the fitting. Replacements can be found here: https://www.seemecnc.com/collections/pa ... tc-fitting

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Post Reply

Return to “RostockMAX v3”