Tall TPU print

The one, the only, the Atremis. Forum for the monster metal machine from SeeMeCNC
Post Reply
biotechnc
Noob
Posts: 2
Joined: Thu Mar 28, 2019 8:31 pm

Tall TPU print

Post by biotechnc »

We've had moderate success with printing a few patient devices under 200mm in height on our new Artemis. We're about to embark on our first "tall" TPU print (over 400mm). Any words of wisdom to hedge against glitches associated with vibration / shaking as the print gets taller would be greatly appreciated.
Post Reply

Return to “Artemis”