static ip address

The one, the only, the Atremis. Forum for the monster metal machine from SeeMeCNC
Post Reply
User avatar
felich
Prints-a-lot
Posts: 22
Joined: Fri Oct 21, 2016 3:41 pm
Contact:

static ip address

Post by felich »

I have to go into another room to see what ip address Artemis received.
Is there any way to set a static ip address?
geneb
ULTIMATE 3D JEDI
Posts: 5362
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: static ip address

Post by geneb »

If you didn't change the name of the printer in config.g, you can access it via http://artemis.local. If you renamed the printer, make sure there's no spaces in the name - you can access it via http://my_printer_name.local.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
dc42
Printmaster!
Posts: 454
Joined: Mon Mar 07, 2016 10:17 am

Re: static ip address

Post by dc42 »

You can set a static IP address using M587 if using a Duet WiFi, or M552 if using Duet Ethernet. But many people use an address reservation on the router instead.
Post Reply

Return to “Artemis”