Field Service Bulletin Ground Wire October 2020

The one, the only, the Atremis. Forum for the monster metal machine from SeeMeCNC
Post Reply
User avatar
Posts: 374
Joined: Fri Mar 23, 2012 4:03 pm

Field Service Bulletin Ground Wire October 2020

Post by PartDaddy »

We have issued a Field Service Bulletin (FSB) for the Artemis 3D printer.

Please take a moment to download the FSB document in this post and perform the correction.

Summary of this FSB:
The printer DC Negative output of the power supply needs to be connected to the AC
Ground (GND). This guide will provide instructions on how to perform the installation of
the grounding wire for each specific model. This guide also provides the proper method
of testing to ensure the service has been completed properly.

SeeMeCNC Owner & Founder
Blackpoint Engineering is SeeMeCNC
Since 1996
Post Reply

Return to “Artemis”