wifi issues

This forum is for discussions specific to the Duet-equipped RostockMAX v3.2 3D printer.
Post Reply
WiscoMudder
Plasticator
Posts: 18
Joined: Tue May 02, 2017 2:43 pm

wifi issues

Post by WiscoMudder »

trying to connect to a new wifi router and having allot of issues, needless to say old router is dead.... and new one is an auto shift to 2.4 or 5 it just does it thing... my printer is the only thing having issues connecting and seeming to run into dead end... I forgot how to get it to sync to a new wifi apparently...

Direct pointing or real help needed please!
geneb
ULTIMATE 3D JEDI
Posts: 5362
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: wifi issues

Post by geneb »

There can be issues if the SSID for the 2.4Ghz and 5Ghz WiFi interfaces are the same. Try adding a "-5" to the name of the 5Ghz interface.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
WiscoMudder
Plasticator
Posts: 18
Joined: Tue May 02, 2017 2:43 pm

Re: wifi issues

Post by WiscoMudder »

my new wifi is all Mesh wifi so it blends. I might have to add another 2.4 ghz into this system to make it work. uggh
Post Reply

Return to “RostockMAX v3.2”