Building the Whip for V3.2

This forum is for discussions specific to the Duet-equipped RostockMAX v3.2 3D printer.
Post Reply
brianmichalk
Printmaster!
Posts: 43
Joined: Fri Aug 12, 2016 3:20 pm

Building the Whip for V3.2

Post by brianmichalk »

I bought the kit to upgrade from 3.0 to 3.2. I must be an early adopter, because the instructions for building the whip are not complete. Does anyone have a picture they can send of their whip? I'm interested in each end.
brianmichalk
Printmaster!
Posts: 43
Joined: Fri Aug 12, 2016 3:20 pm

Re: Building the Whip for V3.2

Post by brianmichalk »

I found some pictures from later in the build. I may not have it perfect, but it seems to be close.
geneb
ULTIMATE 3D JEDI
Posts: 5362
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Building the Whip for V3.2

Post by geneb »

The whip didn't come pre-assembled?

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Post Reply

Return to “RostockMAX v3.2”