Bed leveling issue

This forum is for discussions specific to the Duet-equipped RostockMAX v3.2 3D printer.
Post Reply
wellthad
Plasticator
Posts: 8
Joined: Thu Apr 22, 2021 9:45 pm

Bed leveling issue

Post by wellthad »

So I have successfully upgraded to the v3.2 and had 2 successfully benchies printed. I noticed my belts where a little loose. So I tightened them a little and I made the mistake of running the first probe instead of just probe and now I can't get the bed level. I try the same benchy and just the foot print of the benchy has almost 1mm of deviation. I have no idea how to proceed.
wellthad
Plasticator
Posts: 8
Joined: Thu Apr 22, 2021 9:45 pm

Re: Bed leveling issue

Post by wellthad »

Pully grub screws!!! Apparently I forgot to lock tight the threads.
geneb
ULTIMATE 3D JEDI
Posts: 5362
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Bed leveling issue

Post by geneb »

Those self-inflicted wounds hurt the most. :D

Glad you got it sorted!

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Post Reply

Return to “RostockMAX v3.2”