Whooo Hooo !! Changing Temp during printing

A place to talk about slic3r software (http://slic3r.org)
Post Reply
RAMTechRob
Printmaster!
Posts: 171
Joined: Tue Apr 22, 2014 10:00 pm

Whooo Hooo !! Changing Temp during printing

Post by RAMTechRob »

Well, I finally saw the need to change extruder temps during some complicated prints. 198 for the first layer, 200 for the next few, then 202 for the fast infill. I got tired of changing it manually, so I changed the G-code!! Its running great now and I don;t have to watch it or hear the notorious clicking and jams.
User avatar
beilmandesign
Printmaster!
Posts: 52
Joined: Mon Nov 17, 2014 2:32 pm

Re: Whooo Hooo !! Changing Temp during printing

Post by beilmandesign »

Thanks for the tip. Never thought of that. :oops:
Post Reply

Return to “Slic3r”