Hola - DC area checking in!

Introduce yourself to the community!
Post Reply
DDXdesign
Printmaster!
Posts: 76
Joined: Mon Apr 01, 2019 10:56 am

Hola - DC area checking in!

Post by DDXdesign »

I'm Dave - a govt contractor by day and a designer/illustrator/maker/geek/musician by night. Got into 3D printing just over 3 years ago - my now ex-wife bought me a little XYZ DaVinci Jr machine and it's taken off from there. I still have that machine albeit not working at the moment, plus I have a DV Jr Pro that has been awesome, a MP Maker Select V2 that a friend gave me after giving up on it (Still have one more thing to try to get it working well enugh to use), and just got a RostockMaxV4 for its increased speed and build volume, after trying and failing miserably with a CR10S Pro and a MP Maker Pro (wanhao D9). Figured the SMCNC would be worth the extra money and so far it is!

Most of my 3D prints are functional; I've developed a few products I sell, mainly for guitar and bass players (I'm a bassist mainly myself). DDXdesign.com if you'd like to have a look.
geneb
ULTIMATE 3D JEDI
Posts: 5362
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Hola - DC area checking in!

Post by geneb »

Welcome to the zoo!

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Post Reply

Return to “New Member introduction”