HELLO from ITALY
Posted: Mon Dec 02, 2013 10:01 am
Hello makers. I'm already working to change some plastic parts, transforming them into aluminum parts. pictures short 
Welcome to the SeeMeCNC Community
Have a look around and join today!
https://download.seemecnc.com/forum/
HELLO from ITALY
https://download.seemecnc.com/forum/viewtopic.php?f=2&t=3776
Page 1 of 1
Re: HELLO from ITALY
Posted: Mon Dec 02, 2013 10:06 am
You mean, you're making parts of the rostock in Aluminium? ... nice!
Re: HELLO from ITALY
Posted: Mon Dec 02, 2013 10:12 am
Are you printing plastic parts to make molds for aluminum?
More details please, this sounds awesome!
More details please, this sounds awesome!
Re: HELLO from ITALY
Posted: Mon Dec 02, 2013 12:46 pm
THIS IS THE FIRST
Re: HELLO from ITALY
Posted: Mon Dec 02, 2013 12:50 pm
Very cool, and you are going to need some plastic shims in there to prevent the aluminum from galling up.
Re: HELLO from ITALY
Posted: Tue Dec 03, 2013 2:15 am
On this part i've used different type of alluminium and some little ring in TEFLON (specific name of the plastic material) , next step in the installation of mini compensating for reducing weight and possible vibrations.
Re: HELLO from ITALY
Posted: Wed Dec 04, 2013 6:17 pm
Hi Darios, how it goes with the Rostock Max? Although I write from Italy, I have recently had some electrical problem but it seems that it is almost clear what happened, I am going to solve the problem, fortunately.
I hope that we can get in touch to share our experience with seemecnc =)
I hope that we can get in touch to share our experience with seemecnc =)