Should OnShape and Fusion360 have their own section here

Post Reply
User avatar
Windshadow
Printmaster!
Posts: 526
Joined: Mon Nov 30, 2015 6:35 pm
Location: Mid Coast Maine

Should OnShape and Fusion360 have their own section here

Post by Windshadow »

I see that some of the software topic sections have had no use since 2013 perhaps those topics could be reset for OnShape?
http://3dprintingindustry.com/2015/12/1 ... hape-apps/" onclick="window.open(this.href);return false;
Fusion360 might also make more sense than then little used ones
bot
Printmaster!
Posts: 993
Joined: Thu Sep 25, 2014 12:18 am
Location: Vancouver
Contact:

Re: Should OnShape and Fusion360 have their own section here

Post by bot »

I'm not sure why we need so many sub-forums anyway. I always just "search for new posts" or "active posts" or the like... The topics should be more general, not more specific.
*not actually a robot
Post Reply

Return to “Other”