New 4 Axis Board - TB6560 question

Post Reply
User avatar
niner_zero
Plasticator
Posts: 5
Joined: Thu Aug 09, 2012 11:23 pm

New 4 Axis Board - TB6560 question

Post by niner_zero »

I got a 4 Axis Board - TB6560 from SeeMeCNC store. Does this version require the opto coupler fix? Can some one please provide some info?

Thanks,
Jacob
User avatar
niner_zero
Plasticator
Posts: 5
Joined: Thu Aug 09, 2012 11:23 pm

Re: New 4 Axis Board - TB6560 question

Post by niner_zero »

johnoly99
Printmaster!
Posts: 736
Joined: Mon Mar 26, 2012 1:07 pm
Location: Goshen, IN

Re: New 4 Axis Board - TB6560 question

Post by johnoly99 »

niner, some people don't have any problems with the optos, but some do? If in doubt, jumper them out. haha. I think it has to do with P port voltage, some ports are 3v and some 5v, i'd guess the 5v ones don't have any issues pushing thru the optos
User avatar
niner_zero
Plasticator
Posts: 5
Joined: Thu Aug 09, 2012 11:23 pm

Re: New 4 Axis Board - TB6560 question

Post by niner_zero »

Removed the optos as described in this forum and rewired with reformed staple pins. Time to spin the motors

[img]http://i1166.photobucket.com/albums/q60 ... da3510.jpg[/img]
Post Reply

Return to “Parallel Port based boards”