I got a 4 Axis Board - TB6560 from SeeMeCNC store. Does this version require the opto coupler fix? Can some one please provide some info?
Thanks,
Jacob
New 4 Axis Board - TB6560 question
- niner_zero
- Plasticator
- Posts: 5
- Joined: Thu Aug 09, 2012 11:23 pm
- niner_zero
- Plasticator
- Posts: 5
- Joined: Thu Aug 09, 2012 11:23 pm
Re: New 4 Axis Board - TB6560 question
Never mind, I found the post. http://forum.seemecnc.com/viewtopic.php?f=22&t=49
Re: New 4 Axis Board - TB6560 question
niner, some people don't have any problems with the optos, but some do? If in doubt, jumper them out. haha. I think it has to do with P port voltage, some ports are 3v and some 5v, i'd guess the 5v ones don't have any issues pushing thru the optos
- niner_zero
- Plasticator
- Posts: 5
- Joined: Thu Aug 09, 2012 11:23 pm
Re: New 4 Axis Board - TB6560 question
Removed the optos as described in this forum and rewired with reformed staple pins. Time to spin the motors
[img]http://i1166.photobucket.com/albums/q60 ... da3510.jpg[/img]
[img]http://i1166.photobucket.com/albums/q60 ... da3510.jpg[/img]