Printable probe bracket

User-Generated tips and tricks for the Rostock Max, Orion, H1.1, or H1 Printers
Post Reply
User avatar
bvandiepenbos
Printmaster!
Posts: 927
Joined: Thu Apr 05, 2012 11:25 pm
Location: Goshen, IN
Contact:
Contact bvandiepenbos

Printable probe bracket

Post by bvandiepenbos »

Bracket I designed to use a common end stop switch for probing. Mounts to the MAX Metal Platform.
http://repables.com/r/815/

The calibration built into the dc42 firmware on the Duet board works wonderfully!


Fusion 360 and .step files also, so you can modify for other platforms.
~*Brian V.

RostockMAX v2 (Stock)
MAX METAL "ShortyMAX"
MAX METAL Rostock MAX Printer Frame
NEMESIS Air Delta v1 & v2 -Aluminum delta printers
Rostock MAX "KITT" - Tri-Force Frame
GRABER i3 "Slim"
Top
Post Reply

Return to “General Tips 'N Tricks”