I posted these in another post but I thought I would get a thread going here so that we can all compare settings.
For the record: 1.75mm ABS
3 axis Chinese board with easydriver on the extruder and heated bed.
Share your configs!
- Chris Muncy
- Printmaster!
- Posts: 137
- Joined: Mon Mar 26, 2012 1:30 pm
- Location: Willis, Texas
- michaellatif
- Printmaster!
- Posts: 357
- Joined: Mon Mar 26, 2012 1:34 pm
- Location: RTP, NC
Re: Share your configs!
I am using Repetier Host with slic3r 0.7.1 (internal to Repetier Host), my slic3r settings are here along with my settings for Repetier Host
http://forum.seemecnc.com/viewtopic.php?f=31&t=33
http://forum.seemecnc.com/viewtopic.php?f=31&t=33
Mike Latif
H-1 #3
H-1 #3