RSMV3.2 extrusion

Having a problem? Post it here and someone will be along shortly to help
Post Reply
wellthad
Plasticator
Posts: 8
Joined: Thu Apr 22, 2021 9:45 pm

RSMV3.2 extrusion

Post by wellthad »

I have been loving this machine after the upgrade. There're two things I'm still trying to work out though. The first is that the pressure in the bowden tube is lost during retraction causing a little underextrusion at the beginning of some paths. The second is accuracy. It's close but not quite there. On the 0.15 - 0.5 clearance test on thingiverse it fuses both the .2 and .15 in place. Any assistance with this would be highly appreciated.
geneb
ULTIMATE 3D JEDI
Posts: 5362
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: RSMV3.2 extrusion

Post by geneb »

What slicer are you using? What are your retract speed & distance set at? What's your nozzle size?

tnx!

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Post Reply

Return to “Troubleshooting”