This is just an enclosure for easy wiring for IBT-2 controller. Print the files separately without support and just assemble as seen in the picture. The 4 holes to be tapped 3mm and use 4 M3 screws to tighten with IBT2 base. posted on Thingiverse.
http://www.thingiverse.com/thing:1663701
IBT 2 DC Motor Controller Enclosure
-
- Printmaster!
- Posts: 276
- Joined: Thu Dec 11, 2014 12:50 am
-
- Printmaster!
- Posts: 622
- Joined: Wed Apr 13, 2016 7:42 pm
Re: IBT 2 DC Motor Controller Enclosure
^looks nicely done. What do the motors drive?