Live today

Post your streaming time/info here, so people know when you're printing live
Post Reply
Fester
Prints-a-lot
Posts: 33
Joined: Sat Feb 22, 2014 10:06 pm

Live today

Post by Fester »

I am broadcasting live at http://ustre.am/1barQ" onclick="window.open(this.href);return false; come and check it out!

Just playing round with some setting and printing little gagets for my printer
User avatar
JohnStack
Printmaster!
Posts: 852
Joined: Thu Jan 03, 2013 7:07 pm
Location: Carlsbad, CA
Contact:

Re: Live today

Post by JohnStack »

Fester, there is a google hangout that Geneb has made sticky. It's best that these are kept there. I just went to the feed - it was off air.

Live today in a discussion forum doesn't quite work except in a forum that's live.

I would have liked to have seen what you were working on...

Cheers!
Technologist, Maker, Willing to question conventional logic
http://dropc.am/p/KhiI1a" onclick="window.open(this.href);return false;
User avatar
Jimustanguitar
ULTIMATE 3D JEDI
Posts: 2631
Joined: Sun Mar 31, 2013 1:35 am
Location: Notre Dame area
Contact:

Re: Live today

Post by Jimustanguitar »

I have that spool holder in the exact same color!

Looks good so far.
columbia_u2
Plasticator
Posts: 15
Joined: Tue Feb 25, 2014 8:49 pm

Re: Live today

Post by columbia_u2 »

Are printing PLA or ABS ?
I am new to the ORION and would you be willing to share your settings?
Fester
Prints-a-lot
Posts: 33
Joined: Sat Feb 22, 2014 10:06 pm

Re: Live today

Post by Fester »

I was live got disconnected of a second ,huh imagine that . But I am back .....Its abs and sure I would share what ever you want ..
columbia_u2
Plasticator
Posts: 15
Joined: Tue Feb 25, 2014 8:49 pm

Re: Live today

Post by columbia_u2 »

great,
1. How about you config files for abs and the orion.
2. Did you use the included glue stick?
3. Can i get a copy of you wheel file both the stl and the gcode to compare with what i get.
4. What temps did you use?

thanks any help would be great.
Fester
Prints-a-lot
Posts: 33
Joined: Sat Feb 22, 2014 10:06 pm

Re: Live today

Post by Fester »

all done for today maybe late got some honey do chores. I will send my config files also just pressed for time now
Post Reply

Return to “Live Stream Announcments”